Configured around the workpiece根据工件配置Configured for the target output按目标产能配置Existing interfaces reviewed before integration联机前评估现有设备接口Discuss on WhatsApp通过 WhatsApp 沟通
02 / CONVEYING02 / 输送
Compare conveying systems.输送系统设备选型
Compare 42 relevant equipment and line solutions, then open a product page to review specifications or send an enquiry.比较 42 项相关设备与整线方案,并打开产品页查看参数或提交咨询。
42results项结果
Images and specifications show representative configurations. Final equipment details are confirmed for each project.图片与参数展示代表性配置;最终设备细节将按具体项目确认。
Panel Roller Conveyors, Return Systems & Lift Tables板材滚筒输送线、回板系统与升降台
Compare powered roller conveyors, low-level floor conveyors, unpowered roller lines, edge-bander return systems and hydraulic lift tables for moving furniture panels between production stages.比较动力滚筒输送线、低位地滚线、无动力滚筒线、封边回板系统和液压升降台,为家具板件工序间转运选型。
Is a floor roller conveyor always an unpowered conveyor?地滚线一定是无动力输送线吗?
No. Floor-level or low-level describes the conveyor height and layout. Powered rollers use a drive to move the load; unpowered rollers require manual assistance or a suitably engineered gravity arrangement. Choose drive type separately from conveyor height.不是。地滚或低位描述输送线的高度及布置。动力滚筒依靠驱动输送载荷;无动力滚筒需要人工辅助,或经过合理设计的重力输送布置。驱动方式应与输送高度分别确定。
How do I select a roller conveyor for panel stacks?板材垛输送如何选择滚筒线?
Check stack dimensions, total weight, the underside that contacts the rollers, roller spacing and transfer height. A conveyor suitable for a panel stack is not automatically suitable for every pallet. Pallet runners, gaps and the load distribution need their own support review.需要核对板垛尺寸、总重量、与滚筒接触的底面、辊距及对接高度。适合板垛的输送线并不自动适合所有托盘,托盘底梁、间隙和载荷分布需要单独评估。
Is an edge-bander return conveyor an edge-banding machine?封边回板线就是封边机吗?
A return conveyor moves panels from the edge-bander outfeed toward the operator or next infeed. The edge-banding machine performs the edging process. For a return system, confirm your machine model, feed direction, panel size, outfeed height and available return space.回板线将板件从封边机出料端送回操作位置或下一进料点;封边主机负责封边加工。选择回板系统时,需要确认现有主机型号、进料方向、板件尺寸、出料高度和回板空间。