Belt-Type Panel Return System for Edge-Banding Machines封边机皮带式回料系统
Uses belt conveying for smooth panel return around an edge-banding cell, including products that benefit from gentler surface contact.采用皮带输送完成封边单元的平稳回料,适合需要更柔和表面接触的板材。
Images and specifications show a representative configuration. Final equipment details and delivery schedule are confirmed after your requirements are reviewed.图片与参数展示代表性配置;最终设备细节与交付安排将在需求评审后确认。
Edge-bander return flow封边回板流程
Match the return path to the edge bander, panel and operator workflow.让回板路径与封边机、板件和操作流程相匹配
Best for returning panels around a compatible edge-banding cell using belt transfer where the selected contact surface and layout suit the workpiece. The return system must be engineered around the host machine and actual panel range.适合在兼容的封边加工单元周边,通过皮带输送回送板件,并确保所选接触面和布局适合工件。回板系统必须结合主机和真实板件范围进行设计。
01
Best fit when适合这些情况
Edge-banding cells that return processed panels to a defined receiving position, with operator tasks reviewed against the order mix.将加工后板件回送至明确接料位置,并按订单组合核对人工任务的封边单元。
Panels that benefit from the agreed belt-contact arrangement during return.在回送过程中适合采用约定皮带接触方式的板件。
Projects with enough return-side space and known edge-bander interfaces.具备足够回板侧空间且主机接口明确的项目。
02
Process role工序如何衔接
01Receive the panel from the edge-bander outfeed at the agreed height and orientation.按约定高度和朝向接收封边机出料板件。
02Transfer and redirect the panel through the designed belt-return path.通过设计好的皮带回板路径输送并改变板件流向。
03Present the returned panel at the agreed operator or infeed position.在约定的操作员或再次进料位置交回板件。
03
Send for configuration选型报价请提供
Edge-bander make, model, outfeed height, feed direction and control signals.封边机品牌、型号、出料高度、进料方向和控制信号。
Panel length, width, thickness, weight, finish and sensitive faces.板件长/宽/厚、重量、饰面及敏感表面。
Required return direction, operator position, cycle and buffer behaviour.回板方向、操作位置、目标节拍和缓存方式。
Dimensioned layout, maintenance clearance and safe operator access.带尺寸的布局、维护净空和安全操作通道。
Scope boundary供货边界
A return conveyor supports the edge-banding process; it is not the edge bander itself. Compatibility, usable panel range and sustained cycle depend on the complete interface and layout review.回板输送设备用于配合封边工序,并不是封边主机本身。兼容性、可用板件范围和持续节拍取决于完整的接口与布局评估。
Acceptance focus验收重点
Run representative panel sizes and finishes through the full return route. Check handover, tracking, surface contact, direction changes, operator access, stop recovery and the complete cycle time.使用代表性尺寸和饰面的板件通过完整回板路径,检查交接、运行轨迹、表面接触、转向、人员通道、停机恢复和完整循环时间。
Use these reference specifications as a starting point. Send your workpiece range, line layout and target output to confirm the configuration.以下参数可作为选型参考。请提供工件范围、产线布局和目标产能,以便确认配置。
Working height工作高度
950±50 mm950±50 mm
Workpiece thickness工件厚度
10–60 mm10–60 mm
Workpiece length工件长度
200–2440 mm200–2440 mm
Maximum load最大载荷
60 kg60 kg
Workpiece width工件宽度
60–1220 mm60–1220 mm
Speed速度
18–32 m/min18–32 m/min
Equipment names and purchasing decisions采购名称与工序确认
Do panel return systems and twin-edgebander connection lines do the same job?封边机皮带回转线和封边机左右连线是同一套设备吗?
Return systems bring panels back towards the feeding position for another machining pass. A belt return conveyor uses a belt path as part of that movement. A twin-edgebander connection coordinates two machines and may require a different direction, orientation or buffer arrangement. For panel infeed to edge processing, mark the receiving table, transfer belts, operator positions and next machining edge on the layout before comparing quotations. FORTRAN supplies these handling connections; the edge-banding machines and their interfaces are specified separately.封边机皮带回转线主要把板件送回进料侧,便于继续加工其他边;封边机左右连线则需要协调两台主机的进出料,流向、板件朝向和缓存要求可能不同。富全有皮带回板和双机回板配置。询价时应在图上标明接料台、移载段、人工站位及下一次加工的板边,不能仅按“回转线”名称比较价格。
Related purchasing terms: belt return conveyor for edge banders; edge banding panel belt return; belt-type workpiece return system. Confirm the operating method and supplied equipment against the configuration on this page.相关采购叫法:封边机皮带回板线、封边板件皮带回送、皮带式工件回流系统。请结合本页配置确认操作方式与供货设备范围。
Buyer questions采购常见问题
Questions to settle before choosing this equipment.选型前需要确认的问题
Can belt speed be converted directly into panels per minute?皮带输送速度能直接换算成每分钟封边板件数吗?
No. Belt speed describes transport, while cell output also depends on panel length and spacing, the edge-bander cycle, return distance, receiving time and any manual repositioning. Agree a representative mixed-panel sequence and measure completed passes, waiting and stop recovery. A faster return belt does not by itself increase the host machine’s processing capacity.不能。皮带速度描述输送运动,工位产出还取决于板件长度与间距、封边机节拍、回送距离、接料时间和人工调整。应约定代表性混合板件顺序,记录完成的加工道次、等待及停机恢复;加快回板皮带本身并不会提高主机的加工能力。
Does the return conveyor select the next edge or flip the panel?回板输送线会自动选择下一条封边边或翻面吗?
Returning a panel to the feeding side is a handling task. It does not establish automatic edge selection or face flipping. Mark the finished edge, next locating edge and required face at each handover. Identify any operator repositioning or additional turning equipment in the layout and quotation.把板件送回进料侧属于搬运任务,不等于自动选择下一条加工边或翻面。应在各交接位置标出已加工边、下一次定位边和所需板面,并在布局与报价中明确人工调整或额外转向设备。
Can a customer-site return-line video confirm our required configuration?客户现场回板视频能否直接确定我厂所需配置?
Use the published belt-return case to discuss the outfeed, return route and receiving position. It is an application reference, not a dimensioned layout or a guarantee for your panel mix. Provide your edge-bander model, working heights, smallest and largest panels and available space; confirm transfer modules, controls and retained operator tasks for your installation.可用已发布的皮带回板案例讨论出料、回送路径和接料位置,但它是应用参考,不是尺寸布局,也不是针对您订单组合的保证。请提供主机型号、工作高度、最小最大板件及可用空间,按实际安装条件确认移载模块、控制和保留人工任务。
Is this the right solution for your production line?这项方案是否适合您的产线?
Send your workpiece sizes, target output, current machine model and destination country so we can review line compatibility and configuration options.请提供工件尺寸、目标产能、现有设备型号和目的国家,以便评估产线适配性与可选配置。