Panel Gravity Roller Conveyor Line
Gravity conveyors & transfer无动力滚筒输送与移载设备

Panel Gravity Roller Conveyor Line板材无动力滚筒输送线

Supports manually assisted transfer of panels and packaged products on unpowered rollers. Gravity movement requires a suitable slope and controlled handling arrangement.通过无动力滚筒承托板材和已包装产品,供人工辅助转运;依靠重力移动需要适当坡度及受控的搬运布置。

Read product details in Chinese →查看中文设备资料与选型 →
Ask on WhatsAppWhatsApp 咨询

Your contact and a short message are enough to start.留下联系方式和一句需求,即可开始沟通。

Brand品牌FORTRANFORTRAN
Manufacturing location生产基地Foshan, Guangdong, China中国广东佛山
Configuration配置方式Project-specific configuration按项目需求配置
Images and specifications show a representative configuration. Final equipment details and delivery schedule are confirmed after your requirements are reviewed.图片与参数展示代表性配置;最终设备细节与交付安排将在需求评审后确认。

Define how every load will move and stop before selecting an unpowered line.选择无动力滚筒线前,先明确每种载荷如何移动与停止

Best for short, clearly defined transfers where an operator or an engineered slope moves a supported panel load or package. Roller spacing, transitions and stopping arrangements should be selected from the real underside of the load.适合在距离较短、路径明确的工位之间,由人员推动或经工程评估的坡度辅助输送有稳定底部支撑的板件载荷或包装件。辊距、过渡和停止方式应根据真实承载底面选择。

01

Best fit when适合这些情况

  • Manual transfer between nearby workstations without a powered drive section.相邻工位之间无需动力驱动段的人工转运。
  • Panels, stacks or packages whose underside can bridge the selected roller spacing.底面能够跨越所选辊距的板件、板垛或包装件。
  • Simple routes where pushing effort, stopping points and operator access can be controlled.能够控制推动力度、停止位置和人员通道的简单路径。
02

Process role工序如何衔接

  1. 01Receive the load squarely on the agreed roller width and transfer height.按约定滚筒宽度和输送高度平稳接收载荷。
  2. 02Move it by the agreed manual or gravity-assisted method.采用约定的人工推动或重力辅助方式移送。
  3. 03Control and stop the load at the receiving position before removal or handover.在接料位置控制并停止载荷,再完成取走或交接。
03

Send for configuration选型报价请提供

  • Load length, width, height, weight and supporting underside.载荷长/宽/高、重量及承载底面。
  • Smallest footprint, required roller spacing, clear width and transfer height.最小底面尺寸、所需辊距、有效宽度和输送高度。
  • Manual pushing method or proposed slope, travel direction and stopping points.人工推动方式或拟用坡度、运行方向和停止位置。
  • Upstream and downstream surfaces, transfer gaps, operator route and safety controls.前后道表面、交接缝隙、人员路径及安全控制。
Scope boundary供货边界

An unpowered conveyor does not provide controlled automatic feeding. A level line normally needs manual or external movement; a sloped line requires separate assessment of acceleration, runaway movement and stopping.无动力滚筒线不提供受控自动进料。水平布置通常需要人工或外部移载,坡度布置则必须单独评估加速、溜料和停止方式。

Acceptance focus验收重点

Use the shortest, longest and heaviest representative loads to check support, pushing effort, transitions, tracking and stopping throughout the complete route.使用最短、最长和最重的代表性载荷,检查整段路径上的支撑、推动力度、过渡、运行轨迹和停止表现。

Core specifications.核心参数

Use these reference specifications as a starting point. Send your workpiece range, line layout and target output to confirm the configuration.以下参数可作为选型参考。请提供工件范围、产线布局和目标产能,以便确认配置。

Loading capacity承载能力
600/800 kg/m600/800 kg/m

Equipment names and purchasing decisions采购名称与工序确认

Is a roller table conveyor the same as a powered roller conveyor?动力辊台、辊道输送机和无动力滚筒输送机有什么区别?

A roller table conveyor describes the supporting and conveying surface. A motor driven powered roller conveyor moves the load using a drive, while a non driven roller conveyor needs an agreed manual or gravity-assisted transfer method. FORTRAN offers powered and unpowered roller conveyors for panels. Compare the supporting underside, roller pitch, transfer height and stopping arrangement before choosing the drive. Floor-level placement describes the layout height, not the source of movement.“辊道输送机”或“滚筒输送机”描述以辊筒承托物料的设备;动力辊台带有驱动,无动力滚筒输送机也称无动力辊道输送机,需要明确人工推送或经评估的重力移送方式。富全提供相应的板材输送配置。比较时先核对底面支撑、辊距、交接高度与停止方式,再选择驱动,不能把低位地滚布置直接等同于无动力。

Compare equipment and quotation requirements比较相关设备与询价条件 →

How does roller pitch affect panel stacks and furniture cartons?地滚输送线的辊筒间距,为什么要同时核对小板、板垛和纸箱?

Roller pitch is the spacing between neighbouring roller centres. A roller conveyor needs sufficient support under the shortest load and at each transfer gap. Test the bottom panel of a bare stack, the runners of a pallet and the underside of a loaded carton as different support cases. For a FORTRAN panel transfer unit, provide the smallest footprint, load distribution, travel direction and receiving surface. Confirm transitions and stopping with representative loads instead of choosing the spacing from total weight alone.辊筒间距即相邻辊筒中心之间的距离。滚筒输送线要让最短物料及跨越交接缝隙的物料获得足够支撑。裸板垛底板、托盘底梁和装件纸箱底面属于不同工况,应分别试验。富全移载输送单元选型需要最小底面尺寸、重量分布、移动方向和接料表面,并使用代表性载荷确认过渡及停止,不能只按总重量选择辊距。

Compare equipment and quotation requirements比较相关设备与询价条件 →

Names used for this equipment这款设备的采购叫法

Related purchasing terms: unpowered panel roller conveyor; manual board roller transfer line; furniture panel gravity roller conveyor. Confirm the operating method and supplied equipment against the configuration on this page.相关采购叫法:无动力板材滚筒输送线、人工板件辊筒转运线、家具板材地滚线。请结合本页配置确认操作方式与供货设备范围。

Questions to settle before choosing this equipment.选型前需要确认的问题

What is this equipment used for?板材无动力滚筒输送线有什么用途?

It supports manually assisted transfer of panels and packaged products on unpowered rollers. Gravity movement requires a suitable slope and controlled handling arrangement.通过无动力滚筒承托板材和已包装产品,供人工辅助转运;依靠重力移动需要适当坡度及受控的搬运布置。

What affects the price of this equipment?板材无动力滚筒输送线的价格受哪些因素影响?

The price and machine scope depend on load dimensions and weight, supporting underside, roller spacing, transfer height, direction and stopping points. A useful quotation should state the operating range, included equipment and project responsibilities instead of giving one price for different configurations.板材无动力滚筒输送线的价格和设备范围取决于载荷尺寸与重量、承载底面、辊距、输送高度、方向和停止位置。有效报价应说明运行范围、包含设备和项目责任,不能用一个价格代表不同配置。

What information should I send for a quotation?询问板材无动力滚筒输送线报价时需要提供什么?

Send load dimensions and weight, supporting underside, roller spacing, transfer height, direction and stopping points, plus photos or drawings of the available area and any equipment that must connect to the new machine. These details help the supplier propose a configuration that fits your project.请提供载荷尺寸与重量、承载底面、辊距、输送高度、方向和停止位置,并附可用场地照片或图纸,以及需要连接的现有设备资料,便于制造商或供应商按照实际项目提出方案。

How should I compare equipment suppliers?如何比较板材无动力滚筒输送线制造商和供应商?

Ask each company to respond to the same requirement brief. Compare the proposed configuration, stated limits, layout, controls and interfaces, acceptance method, documentation, delivery scope, installation responsibilities and after-sales support.建议让每家公司按照同一份需求资料回复,并比较建议配置、明确限制、布局、控制与接口、验收方法、技术文件、交付范围、安装责任和售后支持。

Project enquiry项目咨询

Is this the right solution for your production line?这项方案是否适合您的产线?

Send your workpiece sizes, target output, current machine model and destination country so we can review line compatibility and configuration options.请提供工件尺寸、目标产能、现有设备型号和目的国家,以便评估产线适配性与可选配置。

Ask on WhatsAppWhatsApp 咨询
No app or email client required

Get a quick quote

Leave a contact method and one sentence about what you need so we can discuss your project.

Current pageGeneral website enquiry
Choose more than one if needed. Quick text is added without replacing your own message.