Vacuum-Type Panel Turnover Machine
Powered conveyors板材动力滚筒输送系统

Vacuum-Type Panel Turnover Machine吸盘式板材翻转机

Uses vacuum gripping to turn smooth or delicate panels with controlled contact during the turnover cycle.采用真空吸附,以受控接触方式翻转表面光滑或易损的板材。

Read product details in Chinese →查看中文设备资料与选型 →
Ask on WhatsAppWhatsApp 咨询

Your contact and a short message are enough to start.留下联系方式和一句需求,即可开始沟通。

Brand品牌FORTRANFORTRAN
Manufacturing location生产基地Foshan, Guangdong, China中国广东佛山
Configuration配置方式Project-specific configuration按项目需求配置
Images and specifications show a representative configuration. Final equipment details and delivery schedule are confirmed after your requirements are reviewed.图片与参数展示代表性配置;最终设备细节与交付安排将在需求评审后确认。

Core specifications.核心参数

Use these reference specifications as a starting point. Send your workpiece range, line layout and target output to confirm the configuration.以下参数可作为选型参考。请提供工件范围、产线布局和目标产能,以便确认配置。

Workpiece length工件长度
400–2440 mm400–2440 mm
Workpiece width工件宽度
300–1220 mm300–1220 mm
Workpiece thickness工件厚度
10–60 mm10–60 mm
Maximum workpiece weight工件最大重量
50 kg50 kg
Turnover cycle rate翻转循环速度
3–4 cycles/min3–4 次/分钟
Working air pressure工作气压
0.4–0.6 MPa0.4–0.6 MPa

Selection guide: Vacuum-Type Panel Turnover Machine选购吸盘式板材翻转机前需要了解什么

Buyers may use different terms for the same equipment or application. These terms describe this product family and help you compare the correct equipment; the final configuration still depends on the workpiece and line layout.不同地区的采购人员可能使用不同叫法。以下词语用于描述这款设备及其应用,帮助找到正确产品;最终配置仍需根据工件和产线布局确定。

Equipment name设备名称Vacuum-Type Panel Turnover Machine吸盘式板材翻转机
Related purchasing terms相关采购叫法vacuum panel flippersuction-grip board turnover machinevacuum board turning equipment真空吸附板材翻板机吸盘夹持板件翻转机真空木板翻面设备

What is this equipment used for?吸盘式板材翻转机有什么用途?

It uses vacuum gripping to turn smooth or delicate panels with controlled contact during the turnover cycle.采用真空吸附,以受控接触方式翻转表面光滑或易损的板材。

What affects the price of this equipment?吸盘式板材翻转机的价格受哪些因素影响?

The price and machine scope depend on panel dimensions and weight, required rotation angle and axis, surface protection, transfer height, cycle and available footprint. A useful quotation should state the operating range, included equipment and project responsibilities instead of giving one price for different configurations.吸盘式板材翻转机的价格和设备范围取决于板件尺寸与重量、旋转角度和轴向、表面保护、输送高度、节拍和可用空间。有效报价应说明运行范围、包含设备和项目责任,不能用一个价格代表不同配置。

What information should I send for a quotation?询问吸盘式板材翻转机报价时需要提供什么?

Send panel dimensions and weight, required rotation angle and axis, surface protection, transfer height, cycle and available footprint, plus photos or drawings of the available area and any equipment that must connect to the new machine. These details help the supplier propose a configuration that fits your project.请提供板件尺寸与重量、旋转角度和轴向、表面保护、输送高度、节拍和可用空间,并附可用场地照片或图纸,以及需要连接的现有设备资料,便于制造商或供应商按照实际项目提出方案。

How should I compare equipment suppliers?如何比较吸盘式板材翻转机制造商和供应商?

Ask each company to respond to the same requirement brief. Compare the proposed configuration, stated limits, layout, controls and interfaces, acceptance method, documentation, delivery scope, installation responsibilities and after-sales support.建议让每家公司按照同一份需求资料回复,并比较建议配置、明确限制、布局、控制与接口、验收方法、技术文件、交付范围、安装责任和售后支持。

Is this equipment suitable for your line?这款设备是否适合您的产线?

Use this checklist before fixing a model or requesting a final quotation.在确定型号或索取最终报价之前,可先根据以下条件进行判断。

A likely fit when适合考虑的情况

A panel must change face or orientation before the next operation, rather than simply travel to another workstation.板件进入下一道工序前需要改变朝向或翻面,而不仅是在工位之间输送。

Confirm before selection选型前需要确认

Confirm turning motion, panel weight and dimensions, suction-contact areas, surface porosity and finish. Review vacuum holding and release with representative workpieces and the adjoining conveyor.确认翻转动作、板件重量和尺寸、吸附接触位置、表面透气性与饰面情况;结合代表性工件及相邻输送设备评估吸附和释放过程。

Scope to confirm需要明确的功能边界

Vacuum gripping needs a suitable contact surface. Porous, uneven or sensitive finishes require an application review; suitability cannot be inferred from panel size alone.真空吸附需要适合的接触表面。多孔、不平整或易损饰面需单独评估,不能仅依据板件尺寸判断适用性。

Helpful details to send建议提交的信息

Workpiece length / width / height, weight, current equipment, layout, target throughput and destination country.工件长/宽/高、重量、现有设备、厂房布局、目标产能和目的国家。

Project enquiry项目咨询

Is this the right solution for your production line?这项方案是否适合您的产线?

Send your workpiece sizes, target output, current machine model and destination country so we can review line compatibility and configuration options.请提供工件尺寸、目标产能、现有设备型号和目的国家,以便评估产线适配性与可选配置。

Ask on WhatsAppWhatsApp 咨询sufortran@gmail.comOpen full enquiry form打开完整咨询表单
No app or email client required

Get a quick quote

Leave a contact method and one sentence about what you need so we can discuss your project.

Current pageGeneral website enquiry
Choose more than one if needed. Quick text is added without replacing your own message.