Select panel turnover machines, rotating tables and transfer trolleys for controlled orientation changes and workstation movement.选择用于受控改变板件朝向和工位转运的翻板机、旋转台和移载台车。
Confirm panel dimensions and weight, required rotation angle and axis, surface protection, transfer height, cycle and available footprint.选型前确认:板件尺寸与重量、旋转角度和轴向、表面保护、输送高度、节拍和可用空间。
Equipment options for panel transfer & turnover equipment.板材转运与翻转设备有哪些设备选择
Compare the task each machine performs, then open its product page for configuration and operating requirements. Similar names do not necessarily mean the same function.先比较每种设备承担的任务,再查看产品页中的配置及运行要求。名称相近,不一定代表功能相同。
Equipment & application设备与应用
Roller Panel Transfer Trolley板材滚筒移载车
FORTRAN offers a mobile roller trolley for manual panel transfer between nearby workstations. Match its roller surface and handling route to the receiving equipment.FORTRAN 富全板材滚筒转运推车用于相邻工位之间的人工辅助移送,常用名称包括滚筒推车、滚筒转运车和板材转运车。应根据接料高度、工件底部支撑和移动路径选择配置。
Related names & terminology相关设备叫法
roller top trolleymanual panel transfer trolleyroller conveyor handcartwoodworking roller cart
FORTRAN supplies a powered rail-guided vehicle for panel-load transfer between storage, processing and conveyor stations. Fixed rails define its travel route.FORTRAN 富全 RGV 有轨动力游移车沿固定轨道在存储、加工和输送工位之间搬运板材载荷。搜索轨道游移车、板式家具轨道转运车时,需要进一步说明是否要求动力行走、自动定位和输送交接。
Related names & terminology相关设备叫法
rail guided vehicle for panelsRGV panel transfer systemrail guided transfer cart for furnitureRGV material handling system
FORTRAN supplies panel turnover equipment for presenting the opposite panel face to the next furniture-production process. Selection must define the required rotation axis, final orientation and line handover.FORTRAN 富全板材翻转机用于在家具生产工序之间将板件翻面,使另一表面朝向下一道工序。选型必须明确旋转轴、最终朝向和产线交接方式。
Turns panels horizontally between machine infeed and outfeed sections to match the orientation required by the next process.在设备进出料段之间水平翻转板材,使其方向符合下一道工序要求。
Related names & terminology相关设备叫法
horizontal panel flipping machinehorizontal board turnover system
Other applications to discuss with the factory其他应用需求:与工厂确认配置
These applications need a separate configuration review. Tell us the task you need to complete so we can confirm the equipment and scope.以下应用需要单独核对配置。告诉我们希望完成的动作,我们会进一步确认对应设备与供货范围。
rail mounted panel transfer trolley轨道移动台车
roller transfer trolley with forklift pockets带叉车位台车
lateral transfer trolley for wood panels横移台车
drum panel turnover machine滚筒式翻板
windmill panel turnover machine风车翻板
90 degree panel rotation machine板件旋转
Buyer questions采购问题
How to specify panel transfer & turnover equipment.板材转运与翻转设备如何提供选型资料
Is a panel turnover machine the same as a rotating table?板件翻转机与旋转台是同一种设备吗?
No. A turnover machine changes which face is up; a rotating table changes direction around a vertical axis. Describe the desired final face and travel direction before selecting equipment.不是。翻转机改变板件朝上的面,旋转台绕垂直轴改变方向。选型前应说明目标表面朝向和运行方向。
Is an RGV panel transfer system the same as an AGV or AMR?RGV 板件转运系统与 AGV 或 AMR 相同吗?
No. RGV describes rail-guided transfer. AGV and AMR describe different navigation approaches. Select against the actual route, positioning and control requirement rather than using the terms interchangeably.不是。RGV 描述有轨转运,AGV 与 AMR 则对应不同导航方式。应根据真实路线、定位及控制要求选型,不能混用名称。
What information is needed to quote a panel turnover machine?板件翻转机报价需要哪些资料?
Send panel dimensions, thickness, weight and finish, the required turnover angle and axis, interface heights, flow direction, target cycle and a measured layout. A request based only on maximum panel length is incomplete.请提供板件尺寸、厚度、重量与饰面、所需翻转角度与轴向、接口高度、流向、目标节拍及实测布局。只提供最大板长不足以形成可靠报价。
Why do transfer and turnover system prices differ?转运与翻转系统为什么价格差异较大?
The movement, load support, drive, positioning, controls, guarding and connected conveyor scope may differ. Compare the functions and acceptance conditions included in writing before comparing totals.不同方案的动作、载荷支撑、驱动、定位、控制、安全防护和连接输送范围可能不同。比较总价前应书面对齐所含功能与验收条件。