Images and specifications show a representative configuration. Final equipment details and delivery schedule are confirmed after your requirements are reviewed.图片与参数展示代表性配置;最终设备细节与交付安排将在需求评审后确认。
Fixed-route panel transfer固定轨道板材转运
Engineer the rail route, docking stations and load handover as one system.将轨道路由、停靠工位和载荷交接作为一个系统设计
Best for powered transfer of heavy supported panel loads between defined storage, processing or conveyor stations. The RGV travels on fixed rails, so station layout, floor conditions and docking interfaces are core selection inputs.适合在明确的存储、加工或输送工位之间,有动力转运具备稳定支撑的重型板材载荷。RGV 沿固定轨道运行,因此工位布局、地面条件和对接接口是核心选型资料。
01
Best fit when适合这些情况
Repeated transfer between several fixed stations on a defined route.在确定路线上的多个固定工位之间重复转运。
Panel stacks or supported loads with a known footprint, weight and underside.底面尺寸、重量及承载结构明确的板垛或支撑载荷。
Layouts that need controlled travel, positioning and station-permission signals.需要受控行走、定位和工位放行信号的布局。
02
Process role工序如何衔接
01Receive the load at an agreed docking and transfer height.在约定停靠位置和交接高度接收载荷。
02Travel along the fixed rail route to the assigned station.沿固定轨道路由行驶至指定工位。
03Position and transfer only after the receiving station grants permission.定位并取得接料工位放行后,才完成载荷交接。
03
Send for configuration选型报价请提供
Load length, width, height, weight, centre of gravity and supporting underside.载荷长/宽/高、重量、重心及承载底面。
Dimensioned rail route, travel distance, station positions and required throughput.带尺寸的轨道路由、运行距离、工位位置和目标产出。
Floor condition, installation limits, power arrangement and travel clearance.地面条件、安装限制、供电方式和运行净空。
Docking height, transfer surface, positioning tolerance and station signals.对接高度、移载表面、定位要求和工位信号。
Scope boundary供货边界
An RGV is constrained to its rail route; it is not an AGV or AMR with free navigation. The vehicle, rails, transfer surface, controls and any surrounding guarding should be itemized in the proposal.RGV 受固定轨道路由约束,不是自由导航的 AGV 或 AMR。车辆、轨道、移载表面、控制和周边安全防护应在方案中分别列明。
Acceptance focus验收重点
Test representative loads at every station, including docking, loaded travel, transfer permission, positioning, obstruction response and recovery after an interruption.在每个工位使用代表性载荷,检查对接、带载运行、交接放行、定位、障碍响应和中断后的恢复。
Use these reference specifications as a starting point. Send your workpiece range, line layout and target output to confirm the configuration.以下参数可作为选型参考。请提供工件范围、产线布局和目标产能,以便确认配置。
Working height工作高度
950±30 mm950±30 mm
Workpiece thickness工件厚度
10–60 mm10–60 mm
Workpiece length工件长度
600–2750 mm600–2750 mm
Maximum load最大载荷
3000 kg / 5000 kg3000 kg / 5000 kg
Workpiece width工件宽度
280–1220 mm280–1220 mm
Equipment names and purchasing decisions采购名称与工序确认
When should a furniture factory specify an RGV trolley instead of a manual cart?RGV 有轨转运车与人工滚筒台车,报价范围有什么不同?
An RGV is a track-bound transport system that follows a defined rail route and coordinates travel and transfer at assigned stations. A manual roller transfer trolley relies on the agreed operator handling method. FORTRAN offers these different handling arrangements. An RGV enquiry needs rail length, stopping positions, load support and station signals; a manual-cart enquiry needs floor conditions, travel path and the assessed pushing and transfer task. Rail guidance does not provide AGV or AMR autonomous navigation.RGV 有轨转运车沿约定轨道运行,并在指定工位完成行走与移料交接;人工滚筒台车则依赖经评估的人工搬运方式。富全有相应转运配置。RGV 询价应说明轨道长度、停靠位置、承载结构和工位信号,人工台车询价应说明地面、移动路径及推送任务。有轨转运不能写成 AGV 或 AMR 自主导航。
Related purchasing terms: rail-guided vehicle; RGV panel transfer cart; powered panel rail transfer system. Confirm the operating method and supplied equipment against the configuration on this page.相关采购叫法:有轨制导车、RGV板材移载车、动力板材轨道转运系统。请结合本页配置确认操作方式与供货设备范围。
Buyer questions采购常见问题
Questions to settle before choosing this equipment.选型前需要确认的问题
What is this equipment used for?有轨制导搬运车(RGV)有什么用途?
It moves heavy panel loads automatically along fixed rails between storage, processing and conveyor stations.沿固定轨道在储存、加工和输送工位之间自动转运重型板材载荷。
What affects the price of this equipment?有轨制导搬运车(RGV)的价格受哪些因素影响?
The price and machine scope depend on panel dimensions and weight, required rotation angle and axis, surface protection, transfer height, cycle and available footprint. A useful quotation should state the operating range, included equipment and project responsibilities instead of giving one price for different configurations.有轨制导搬运车(RGV)的价格和设备范围取决于板件尺寸与重量、旋转角度和轴向、表面保护、输送高度、节拍和可用空间。有效报价应说明运行范围、包含设备和项目责任,不能用一个价格代表不同配置。
What information should I send for a quotation?询问有轨制导搬运车(RGV)报价时需要提供什么?
Send panel dimensions and weight, required rotation angle and axis, surface protection, transfer height, cycle and available footprint, plus photos or drawings of the available area and any equipment that must connect to the new machine. These details help the supplier propose a configuration that fits your project.请提供板件尺寸与重量、旋转角度和轴向、表面保护、输送高度、节拍和可用空间,并附可用场地照片或图纸,以及需要连接的现有设备资料,便于制造商或供应商按照实际项目提出方案。
How should I compare equipment suppliers?如何比较有轨制导搬运车(RGV)制造商和供应商?
Ask each company to respond to the same requirement brief. Compare the proposed configuration, stated limits, layout, controls and interfaces, acceptance method, documentation, delivery scope, installation responsibilities and after-sales support.建议让每家公司按照同一份需求资料回复,并比较建议配置、明确限制、布局、控制与接口、验收方法、技术文件、交付范围、安装责任和售后支持。
Is this the right solution for your production line?这项方案是否适合您的产线?
Send your workpiece sizes, target output, current machine model and destination country so we can review line compatibility and configuration options.请提供工件尺寸、目标产能、现有设备型号和目的国家,以便评估产线适配性与可选配置。