Connects automatic loading, six-sided drilling and unloading so panels can move through the drilling process with less manual handling.连接自动上料、六面钻加工和下料,使板材以更少人工干预完成钻孔流程。
Images and specifications show a representative configuration. Final equipment details and delivery schedule are confirmed after your requirements are reviewed.图片与参数展示代表性配置;最终设备细节与交付安排将在需求评审后确认。
Six-sided drilling connection六面钻工序连线
Connect the drilling machine around real panel flow and control conditions.围绕真实板件物流和控制条件连接六面钻工序
Best for furniture factories that need loading, transfer and unloading coordinated around a six-sided CNC drilling machine. The drilling machine, conveyors, controls and production-data functions should be confirmed as separate supply items.适合需要围绕六面数控钻孔主机协调上料、输送和下料的家具工厂。钻孔主机、输送设备、控制以及生产数据功能,应作为不同供货项目分别确认。
01
Best fit when适合这些情况
Existing or new six-sided drilling machines with defined feed and discharge conditions.进出料条件明确的新建或现有六面钻主机。
Mixed furniture panels that need controlled orientation and handover between stages.需要受控朝向并在工序之间稳定交接的混合家具板件。
Lines that need agreed buffers and recovery rules when drilling stops.需要明确缓存位置及钻孔停机恢复规则的连线。
02
Process role工序如何衔接
01Receive and orient the panel for the drilling infeed.接收板件,并按钻孔进料要求确定朝向。
02Transfer and hand over the panel when the agreed machine conditions are met.在约定主机条件满足后完成输送与交接。
03Discharge the processed panel to the agreed unloading or buffer position.将加工后的板件送往约定下料或缓存位置。
03
Send for configuration选型报价请提供
Drilling machine brand, exact model, feed direction, working height and locating datum.六面钻品牌、完整型号、进料方向、工作高度和定位基准。
Panel size and weight range, surface finish, order mix and permitted orientation.板件尺寸与重量范围、饰面、订单组合及允许朝向。
Required buffers, ready/occupied signals, identification source and data interface.所需缓存、就绪与占用信号、识别来源和数据接口。
Upstream and downstream cycles, dimensioned layout and manual intervention points.前后道节拍、带尺寸布局图和人工干预位置。
Scope boundary供货边界
The connection line does not automatically include the drilling machine, order tracking or MES integration. Conveyor speed is not drilling throughput; sustained output depends on drilling programs, panel mix, handovers and interruption recovery.连线方案不自动包含六面钻主机、订单追踪或 MES 集成。输送速度不等于钻孔产出;持续产出取决于钻孔程序、板件组合、交接和停机恢复。
Acceptance focus验收重点
Run representative mixed panels through normal flow, downstream blocking and restart scenarios. Verify orientation, locating, identity handover, buffer logic, surface contact and complete-line cycle.使用代表性混合板件测试正常运行、后道阻塞和重启场景,核对朝向、定位、身份交接、缓存逻辑、表面接触及整线节拍。
Use these reference specifications as a starting point. Send your workpiece range, line layout and target output to confirm the configuration.以下参数可作为选型参考。请提供工件范围、产线布局和目标产能,以便确认配置。
Working height工作高度
950±50 mm950±50 mm
Workpiece thickness工件厚度
10–60 mm10–60 mm
Workpiece length工件长度
250–2750 mm250–2750 mm
Speed速度
65 m/min65 m/min
Workpiece width工件宽度
50–1220 mm50–1220 mm
Equipment names and purchasing decisions采购名称与工序确认
What separates an intelligent sorting line from a conveyor buffer?家具分拣线、缓存仓和分拣包装连线应怎样拆分需求?
A sorting and conveying system routes panels according to agreed grouping rules; a buffer holds work between operations. For FORTRAN sorting or buffer projects, describe identification, order grouping, missing-part handling, capacity and the next receiving process. Connecting drilling to packaging does not itself create order tracking. Confirm responsibility for software, data exchange and recovery after an interrupted order.家具分拣线按约定规则将板件归组,缓存仓用于工序之间暂存物料。评估富全分拣或缓存项目时,请明确板件识别、订单归组、缺件处理、缓存需求和下一道接料工序。把六面钻连接到包装工序,不等于已具备订单追踪;软件、数据交换以及订单中断后的恢复责任应单独确认。
What do intermediate conveyors need when connecting several processing machines?数控钻多机连线、钻孔中心连线和封边机连线,如何确认节拍与接口?
Intermediate conveyors coordinate material handling between machines that may complete their cycles at different times. Mark the receiving position, available buffer, orientation and release condition at every handover. FORTRAN evaluates conveying and handling modules around the agreed host machines. Define the response when one machine stops, a panel is rejected or an operator removes a part. A faster transfer section does not remove a bottleneck in machining, feeding or unloading; test the complete agreed sequence.数控钻多机连线、钻孔中心连线或封边机连线,需要工序间输送设备协调不同主机的完成时间。应逐个标注接料位置、缓存空间、板件朝向和放行条件。富全围绕约定主机评估输送与搬运模块,并与相关供方确认单机停机、板件退回或人工取走物料时的处理。移载段更快不代表加工、上料或下料瓶颈消失,验收要测试完整流程。
Related purchasing terms: six-sided drilling automation line; panel drilling infeed and outfeed system; six-sided drill loading and unloading line. Confirm the operating method and supplied equipment against the configuration on this page.相关采购叫法:六面钻自动化连线、板材钻孔进出料系统、六面钻上下料连线。请结合本页配置确认操作方式与供货设备范围。
Buyer questions采购常见问题
Questions to settle before choosing this equipment.选型前需要确认的问题
What is this equipment used for?板材自动六面钻生产线有什么用途?
It connects automatic loading, six-sided drilling and unloading so panels can move through the drilling process with less manual handling.连接自动上料、六面钻加工和下料,使板材以更少人工干预完成钻孔流程。
What affects the price of this equipment?板材自动六面钻生产线的价格受哪些因素影响?
The price and machine scope depend on upstream and downstream machine models, interface heights, workpiece orientation, line direction, required accumulation and target cycle. A useful quotation should state the operating range, included equipment and project responsibilities instead of giving one price for different configurations.板材自动六面钻生产线的价格和设备范围取决于前后道主机型号、接口高度、工件朝向、产线方向、所需缓存和目标节拍。有效报价应说明运行范围、包含设备和项目责任,不能用一个价格代表不同配置。
What information should I send for a quotation?询问板材自动六面钻生产线报价时需要提供什么?
Send upstream and downstream machine models, interface heights, workpiece orientation, line direction, required accumulation and target cycle, plus photos or drawings of the available area and any equipment that must connect to the new machine. These details help the supplier propose a configuration that fits your project.请提供前后道主机型号、接口高度、工件朝向、产线方向、所需缓存和目标节拍,并附可用场地照片或图纸,以及需要连接的现有设备资料,便于制造商或供应商按照实际项目提出方案。
How should I compare equipment suppliers?如何比较板材自动六面钻生产线制造商和供应商?
Ask each company to respond to the same requirement brief. Compare the proposed configuration, stated limits, layout, controls and interfaces, acceptance method, documentation, delivery scope, installation responsibilities and after-sales support.建议让每家公司按照同一份需求资料回复,并比较建议配置、明确限制、布局、控制与接口、验收方法、技术文件、交付范围、安装责任和售后支持。
Is this the right solution for your production line?这项方案是否适合您的产线?
Send your workpiece sizes, target output, current machine model and destination country so we can review line compatibility and configuration options.请提供工件尺寸、目标产能、现有设备型号和目的国家,以便评估产线适配性与可选配置。