How to Choose Panel Transfer & Turnover Equipment板材转运与翻转设备选型指南
Choose panel transfer and turnover equipment by the exact movement required: straight transfer, lateral movement, rotation around a vertical axis or flipping to expose the opposite face. These are different tasks and should not share one vague specification.板件转运与翻转设备应根据准确动作选型,包括直线转运、横向移动、绕垂直轴旋转或翻面露出另一侧。这些任务不同,不能共用一份模糊规格。
Compare configurations比较实际配置
Which equipment arrangement fits your production task?哪种设备配置适合您的生产任务?
Define the movement and final orientation明确动作与最终朝向
Draw the incoming and outgoing panel orientation and state whether the process needs a 90-degree direction change, a 180-degree face turnover or only transfer between stations. A turntable and a panel flipper do not perform the same movement.画出来料与出料板件朝向,说明需要九十度改向、一百八十度翻面,还是只在工位之间转运。转盘与板件翻转机执行的动作不同。
Check the complete workpiece range核对完整工件范围
Provide minimum, maximum and typical length, width, thickness and weight, together with surface finish, stiffness and the supported edges. Include narrow, long, flexible or mark-sensitive panels in the review.提供最小、最大及常用长宽厚和重量,以及饰面、刚性与承托边,并在评估中包含窄长、易弯或对接触痕迹敏感的板件。
Match heights, direction and cycle匹配高度、方向与节拍
Record the upstream and downstream machines, transfer heights, gaps, flow direction, required cycle and available footprint. Confirm how the panel is stopped, located and released at each handoff.记录前后道主机、输送高度、间隙、流向、所需节拍和可用空间,并确认板件在各交接点如何停止、定位和放行。
Equipment covered相关设备
Compare the equipment for your application.比较适合您应用的设备
Select panel turnover machines, rotating tables and transfer trolleys for controlled orientation changes and workstation movement.选择用于受控改变板件朝向和工位转运的翻板机、旋转台和移载台车。
Roller Panel Transfer Trolley板材滚筒移载车
FORTRAN offers a mobile roller trolley for manual panel transfer between nearby workstations. Match its roller surface and handling route to the receiving equipment.FORTRAN 富全板材滚筒转运推车用于相邻工位之间的人工辅助移送,常用名称包括滚筒推车、滚筒转运车和板材转运车。应根据接料高度、工件底部支撑和移动路径选择配置。
FORTRAN supplies a powered rail-guided vehicle for panel-load transfer between storage, processing and conveyor stations. Fixed rails define its travel route.FORTRAN 富全 RGV 有轨动力游移车沿固定轨道在存储、加工和输送工位之间搬运板材载荷。搜索轨道游移车、板式家具轨道转运车时,需要进一步说明是否要求动力行走、自动定位和输送交接。
FORTRAN supplies panel turnover equipment for presenting the opposite panel face to the next furniture-production process. Selection must define the required rotation axis, final orientation and line handover.FORTRAN 富全板材翻转机用于在家具生产工序之间将板件翻面,使另一表面朝向下一道工序。选型必须明确旋转轴、最终朝向和产线交接方式。
Turns panels horizontally between machine infeed and outfeed sections to match the orientation required by the next process.在设备进出料段之间水平翻转板材,使其方向符合下一道工序要求。
Move from workpiece data to a confirmed layout.从工件数据到确认布局
01
Define the workpiece range确定工件范围
Provide minimum, maximum and typical products, including weight, surface and supporting underside.提供最小、最大及常用产品,包括重量、表面和承载底面。
02
Map the production sequence梳理生产顺序
Show where the equipment receives, processes, transfers and releases each workpiece.说明设备在何处接收、处理、转运和释放每件工件。
03
Confirm interfaces and cycle确认接口与节拍
Record machine models, heights, directions, signals, operator tasks and target production rate.记录主机型号、高度、方向、信号、操作任务和目标产能。
04
Review the proposed layout检查建议布局
Check access, safety area, maintenance space, utilities and exceptional workpiece handling before final confirmation.最终确认前检查通道、安全区域、维护空间、公用条件和特殊工件处理方式。
Buyer questions采购问题
Questions before choosing a machine or line.选择单机或整线前的常见问题
Is a panel turnover machine the same as a rotating table?板件翻转机与旋转台是同一种设备吗?
No. A turnover machine changes which face is up; a rotating table changes direction around a vertical axis. Describe the desired final face and travel direction before selecting equipment.不是。翻转机改变板件朝上的面,旋转台绕垂直轴改变方向。选型前应说明目标表面朝向和运行方向。
Is an RGV panel transfer system the same as an AGV or AMR?RGV 板件转运系统与 AGV 或 AMR 相同吗?
No. RGV describes rail-guided transfer. AGV and AMR describe different navigation approaches. Select against the actual route, positioning and control requirement rather than using the terms interchangeably.不是。RGV 描述有轨转运,AGV 与 AMR 则对应不同导航方式。应根据真实路线、定位及控制要求选型,不能混用名称。