Turns panels horizontally between machine infeed and outfeed sections to match the orientation required by the next process.在设备进出料段之间水平翻转板材,使其方向符合下一道工序要求。
Images and specifications show a representative configuration. Final equipment details and delivery schedule are confirmed after your requirements are reviewed.图片与参数展示代表性配置;最终设备细节与交付安排将在需求评审后确认。
Technical overview技术概览
Core specifications.核心参数
Use these reference specifications as a starting point. Send your workpiece range, line layout and target output to confirm the configuration.以下参数可作为选型参考。请提供工件范围、产线布局和目标产能,以便确认配置。
Workpiece length工件长度
400–2440 mm400–2440 mm
Workpiece width工件宽度
300–1220 mm300–1220 mm
Workpiece thickness工件厚度
10–60 mm10–60 mm
Maximum workpiece weight工件最大重量
50 kg50 kg
Turnover cycle rate翻转循环速度
3–4 cycles/min3–4 次/分钟
Working air pressure工作气压
0.4–0.6 MPa0.4–0.6 MPa
Equipment names and purchasing decisions采购名称与工序确认
How does a panel turnover machine differ from a panel turner?板件翻转机、板件转向机和锥辊转向机怎样区分?
A panel turnover machine can change which face is uppermost, while a panel turner may rotate a panel in the horizontal plane to present another edge. A tapered-roller transfer changes the conveying arrangement. Terms such as tilters also require an agreed rotation axis and final position; they do not identify a particular FORTRAN model. Mark the entry and exit direction, upper face and reference edge on the layout, then check panel support and clearance using representative workpieces from the intended range.板件翻转机可用于改变朝上的板面;板件转向机可能只在水平面内旋转板件,便于另一条边进入主机;锥辊转向机则属于输送衔接配置。富全目录有不同翻转与转向设备,选型应在布局图中标注进出料方向、上表面及基准边,再用代表性工件核对支撑和运动净空。
Buyers may use different terms for the same equipment or application. These terms describe this product family and help you compare the correct equipment; the final configuration still depends on the workpiece and line layout.不同地区的采购人员可能使用不同叫法。以下词语用于描述这款设备及其应用,帮助找到正确产品;最终配置仍需根据工件和产线布局确定。
Related purchasing terms相关采购叫法horizontal panel turnover machinepanel turnover for engraving and drilling linesHMBT-2812 horizontal flipping machine横向板材翻转机雕刻机进出料翻转工位钻站连线翻转设备
What is this equipment used for?板材水平翻转机有什么用途?
It turns panels horizontally between machine infeed and outfeed sections to match the orientation required by the next process.在设备进出料段之间水平翻转板材,使其方向符合下一道工序要求。
What affects the price of this equipment?板材水平翻转机的价格受哪些因素影响?
The price and machine scope depend on panel dimensions and weight, required rotation angle and axis, surface protection, transfer height, cycle and available footprint. A useful quotation should state the operating range, included equipment and project responsibilities instead of giving one price for different configurations.板材水平翻转机的价格和设备范围取决于板件尺寸与重量、旋转角度和轴向、表面保护、输送高度、节拍和可用空间。有效报价应说明运行范围、包含设备和项目责任,不能用一个价格代表不同配置。
What information should I send for a quotation?询问板材水平翻转机报价时需要提供什么?
Send panel dimensions and weight, required rotation angle and axis, surface protection, transfer height, cycle and available footprint, plus photos or drawings of the available area and any equipment that must connect to the new machine. These details help the supplier propose a configuration that fits your project.请提供板件尺寸与重量、旋转角度和轴向、表面保护、输送高度、节拍和可用空间,并附可用场地照片或图纸,以及需要连接的现有设备资料,便于制造商或供应商按照实际项目提出方案。
How should I compare equipment suppliers?如何比较板材水平翻转机制造商和供应商?
Ask each company to respond to the same requirement brief. Compare the proposed configuration, stated limits, layout, controls and interfaces, acceptance method, documentation, delivery scope, installation responsibilities and after-sales support.建议让每家公司按照同一份需求资料回复,并比较建议配置、明确限制、布局、控制与接口、验收方法、技术文件、交付范围、安装责任和售后支持。
Application fit应用适配
Is this equipment suitable for your line?这款设备是否适合您的产线?
Use this checklist before fixing a model or requesting a final quotation.在确定型号或索取最终报价之前,可先根据以下条件进行判断。
A likely fit when适合考虑的情况
A panel must change face or orientation before the next operation, rather than simply travel to another workstation.板件进入下一道工序前需要改变朝向或翻面,而不仅是在工位之间输送。
Confirm before selection选型前需要确认
Provide a sketch showing the incoming face, turning axis and required exit orientation, plus panel dimensions, weight, stiffness and surface finish. Confirm support, restraint and the handoff to adjacent equipment.提供进料面、旋转轴与出料朝向示意图,以及板件尺寸、重量、刚性和表面处理情况;确认支撑、限位及相邻设备的交接方式。
Scope to confirm需要明确的功能边界
Changing travel direction is not the same as turning a panel over. Confirm the actual motion and test representative workpieces before selecting the mechanism.改变输送方向不等于将板件翻面。应先明确实际动作,再以代表性工件确认机构是否适用。
Helpful details to send建议提交的信息
Workpiece length / width / height, weight, current equipment, layout, target throughput and destination country.工件长/宽/高、重量、现有设备、厂房布局、目标产能和目的国家。
Is this the right solution for your production line?这项方案是否适合您的产线?
Send your workpiece sizes, target output, current machine model and destination country so we can review line compatibility and configuration options.请提供工件尺寸、目标产能、现有设备型号和目的国家,以便评估产线适配性与可选配置。