Panel Transfer & Turnover Equipment Price & Quotation Guide板材转运与翻转设备价格与报价指南
A panel turnover or transfer quotation must correspond to a defined movement, workpiece range and connection layout. Compare suppliers only after the trolley, turntable, flipper, conveyors and controls are separated in the scope.板件翻转或转运报价应对应明确动作、工件范围和连接布局。比较供方前,需要将台车、转盘、翻转机、输送设备及控制分别列入范围。
Define the quotation明确报价范围
What changes the scope, cost and acceptance conditions?哪些条件影响范围、成本及验收?
Send a movement sketch and panel data提交动作示意与板件资料
Provide a layout with incoming and outgoing arrows, the required final orientation, panel range, weight and surface, interface heights and target cycle. Mark columns, aisles and maintenance clearances.提供标明进出方向、最终朝向、板件范围、重量与饰面、接口高度及目标节拍的布局图,并标出立柱、通道和维护净空。
Separate transfer, rotation and turnover functions拆分转运、旋转与翻转功能
Ask for an itemized list of the moving platform, rollers or belts, lifting or rotating mechanism, locating devices, sensors, controls, guarding and adjacent conveyors. State any operator task explicitly.要求分项列出移动平台、滚筒或皮带、升降或旋转机构、定位装置、传感器、控制、安全防护和相邻输送机,并明确人工任务。
Agree on representative movement trials约定代表性动作试验
Use the smallest, largest and difficult panels to check support, orientation, surface contact, transfer gaps and cycle. Include stop and restart conditions and record the acceptance method.使用最小、最大及难处理板件检查支撑、朝向、表面接触、移载间隙和节拍,并计入停止与重启条件,记录验收方法。
Equipment covered相关设备
Compare the equipment for your application.比较适合您应用的设备
Select panel turnover machines, rotating tables and transfer trolleys for controlled orientation changes and workstation movement.选择用于受控改变板件朝向和工位转运的翻板机、旋转台和移载台车。
Roller Panel Transfer Trolley板材滚筒移载车
FORTRAN offers a mobile roller trolley for manual panel transfer between nearby workstations. Match its roller surface and handling route to the receiving equipment.FORTRAN 富全板材滚筒转运推车用于相邻工位之间的人工辅助移送,常用名称包括滚筒推车、滚筒转运车和板材转运车。应根据接料高度、工件底部支撑和移动路径选择配置。
FORTRAN supplies a powered rail-guided vehicle for panel-load transfer between storage, processing and conveyor stations. Fixed rails define its travel route.FORTRAN 富全 RGV 有轨动力游移车沿固定轨道在存储、加工和输送工位之间搬运板材载荷。搜索轨道游移车、板式家具轨道转运车时,需要进一步说明是否要求动力行走、自动定位和输送交接。
FORTRAN supplies panel turnover equipment for presenting the opposite panel face to the next furniture-production process. Selection must define the required rotation axis, final orientation and line handover.FORTRAN 富全板材翻转机用于在家具生产工序之间将板件翻面,使另一表面朝向下一道工序。选型必须明确旋转轴、最终朝向和产线交接方式。
Turns panels horizontally between machine infeed and outfeed sections to match the orientation required by the next process.在设备进出料段之间水平翻转板材,使其方向符合下一道工序要求。
Compare the same scope, responsibilities and acceptance basis.按照相同范围、责任和验收依据比较
01
Define one requirement brief统一需求资料
Use the same workpiece range, output target, layout and interfaces for every supplier.让每个供应商使用相同的工件范围、产能目标、布局和接口资料。
02
Check the scope of supply核对供货范围
Confirm included conveyors, controls, guarding, drawings, installation and commissioning responsibilities.确认报价包含的输送设备、控制、安全防护、图纸,以及安装调试责任。
03
Compare stated limits比较明确限制
Review the operating range and exclusions behind each price instead of comparing only the total.核对每个价格对应的运行范围和排除项,不只比较总价。
04
Agree on acceptance约定验收依据
Record the sample, cycle, functions and documents used to confirm that the equipment meets the agreed scope.记录用于确认设备符合约定范围的样品、节拍、功能和文件。
Buyer questions采购问题
Questions about price, manufacturers and quotations.价格、制造商与报价常见问题
What information is needed to quote a panel turnover machine?板件翻转机报价需要哪些资料?
Send panel dimensions, thickness, weight and finish, the required turnover angle and axis, interface heights, flow direction, target cycle and a measured layout. A request based only on maximum panel length is incomplete.请提供板件尺寸、厚度、重量与饰面、所需翻转角度与轴向、接口高度、流向、目标节拍及实测布局。只提供最大板长不足以形成可靠报价。
Why do transfer and turnover system prices differ?转运与翻转系统为什么价格差异较大?
The movement, load support, drive, positioning, controls, guarding and connected conveyor scope may differ. Compare the functions and acceptance conditions included in writing before comparing totals.不同方案的动作、载荷支撑、驱动、定位、控制、安全防护和连接输送范围可能不同。比较总价前应书面对齐所含功能与验收条件。