Automatically turns panels over between processes and can be configured for the workpiece size, weight and line direction.在工序之间自动翻转板材,并可根据工件尺寸、重量和生产线方向进行配置。
Images and specifications show a representative configuration. Final equipment details and delivery schedule are confirmed after your requirements are reviewed.图片与参数展示代表性配置;最终设备细节与交付安排将在需求评审后确认。
Automatic panel flipping板件自动翻面
Specify the required face, rotation axis and handover—not only the word “turnover.”明确目标板面、旋转轴和交接方式,而不只写“翻板”
Best for turning furniture panels so the opposite face is presented to the next process. The selected mechanism and line arrangement must match the panel range, finish, entry direction and required final orientation.适合将家具板件翻面,使另一表面朝向下一道工序。具体机构与连线布置必须匹配板件范围、饰面、进料方向和要求的最终朝向。
01
Best fit when适合这些情况
Production stages that need the opposite panel face presented automatically.需要自动把板件另一表面翻到上方的生产工序。
Lines with known entry and exit heights, directions and locating references.进出料高度、方向和定位基准明确的产线。
Panel ranges that can be verified for support, clearance and surface contact.能够验证支撑、运动净空和表面接触的板件范围。
02
Process role工序如何衔接
01Receive and locate the panel at the agreed entry position.在约定进料位置接收并定位板件。
02Support and turn it through the defined axis while protecting the agreed surfaces.按确定的旋转轴支撑并翻转板件,同时保护约定表面。
03Present the required face and reference edge to the receiving process.将要求的板面和基准边交给接料工序。
03
Send for configuration选型报价请提供
Minimum, maximum and common panel length, width, thickness and weight.板件最小、最大及常用长/宽/厚与重量。
Panel finish, sensitive faces, openings or shapes that affect support.板件饰面、敏感表面以及影响支撑的开孔或异形。
Entry and exit direction, height, required upper face and locating edge.进出料方向、高度、要求朝上的板面和定位边。
Target complete cycle, air supply, host signals, guarding and available clearance.完整循环目标、气源、主机信号、安全防护和可用净空。
Scope boundary供货边界
A turnover machine changes which face is uppermost. Horizontal rotation or a tapered-roller direction change is a different movement. Compatibility must be confirmed from the complete layout and representative panels.翻板机用于改变朝上的板面;水平旋转或锥辊改变输送方向属于不同动作。兼容性必须结合完整布局和代表性板件确认。
Acceptance focus验收重点
Run representative minimum, maximum and sensitive-finish panels through the full sequence. Check support, surface contact, final orientation, cycle time, guarding and recovery after a stop.使用最小、最大及敏感饰面的代表性板件完成整个循环,检查支撑、表面接触、最终朝向、循环时间、安全防护和停机恢复。
Use these reference specifications as a starting point. Send your workpiece range, line layout and target output to confirm the configuration.以下参数可作为选型参考。请提供工件范围、产线布局和目标产能,以便确认配置。
Workpiece length工件长度
300–2750 mm300–2750 mm
Workpiece width工件宽度
300–1220 mm300–1220 mm
Workpiece thickness工件厚度
10–60 mm10–60 mm
Maximum workpiece weight工件最大重量
100 kg100 kg
Turnover cycle rate翻转循环速度
3–4 cycles/min3–4 次/分钟
Working air pressure工作气压
0.4–0.6 MPa0.4–0.6 MPa
Equipment names and purchasing decisions采购名称与工序确认
How does a panel turnover machine differ from a panel turner?板件翻转机、板件转向机和锥辊转向机怎样区分?
A panel turnover machine can change which face is uppermost, while a panel turner may rotate a panel in the horizontal plane to present another edge. A tapered-roller transfer changes the conveying arrangement. Terms such as tilters also require an agreed rotation axis and final position; they do not identify a particular FORTRAN model. Mark the entry and exit direction, upper face and reference edge on the layout, then check panel support and clearance using representative workpieces from the intended range.板件翻转机可用于改变朝上的板面;板件转向机可能只在水平面内旋转板件,便于另一条边进入主机;锥辊转向机则属于输送衔接配置。富全目录有不同翻转与转向设备,选型应在布局图中标注进出料方向、上表面及基准边,再用代表性工件核对支撑和运动净空。
Related purchasing terms: automatic board flipper; panel face turnover system; wood panel inverting equipment. Confirm the operating method and supplied equipment against the configuration on this page.相关采购叫法:自动板材翻板机、板件翻面系统、木板翻转设备。请结合本页配置确认操作方式与供货设备范围。
Buyer questions采购常见问题
Questions to settle before choosing this equipment.选型前需要确认的问题
What is this equipment used for?板材翻转机有什么用途?
It automatically turns panels over between processes and can be configured for the workpiece size, weight and line direction.在工序之间自动翻转板材,并可根据工件尺寸、重量和生产线方向进行配置。
What affects the price of this equipment?板材翻转机的价格受哪些因素影响?
The price and machine scope depend on panel dimensions and weight, required rotation angle and axis, surface protection, transfer height, cycle and available footprint. A useful quotation should state the operating range, included equipment and project responsibilities instead of giving one price for different configurations.板材翻转机的价格和设备范围取决于板件尺寸与重量、旋转角度和轴向、表面保护、输送高度、节拍和可用空间。有效报价应说明运行范围、包含设备和项目责任,不能用一个价格代表不同配置。
What information should I send for a quotation?询问板材翻转机报价时需要提供什么?
Send panel dimensions and weight, required rotation angle and axis, surface protection, transfer height, cycle and available footprint, plus photos or drawings of the available area and any equipment that must connect to the new machine. These details help the supplier propose a configuration that fits your project.请提供板件尺寸与重量、旋转角度和轴向、表面保护、输送高度、节拍和可用空间,并附可用场地照片或图纸,以及需要连接的现有设备资料,便于制造商或供应商按照实际项目提出方案。
How should I compare equipment suppliers?如何比较板材翻转机制造商和供应商?
Ask each company to respond to the same requirement brief. Compare the proposed configuration, stated limits, layout, controls and interfaces, acceptance method, documentation, delivery scope, installation responsibilities and after-sales support.建议让每家公司按照同一份需求资料回复,并比较建议配置、明确限制、布局、控制与接口、验收方法、技术文件、交付范围、安装责任和售后支持。
Is this the right solution for your production line?这项方案是否适合您的产线?
Send your workpiece sizes, target output, current machine model and destination country so we can review line compatibility and configuration options.请提供工件尺寸、目标产能、现有设备型号和目的国家,以便评估产线适配性与可选配置。