Images and specifications show a representative configuration. Final equipment details and delivery schedule are confirmed after your requirements are reviewed.图片与参数展示代表性配置;最终设备细节与交付安排将在需求评审后确认。
Panel height adjustment板件高度调节
Select the lifting table from the real load—not capacity alone.根据真实载荷选择升降台,而不只看额定吨位
Best for raising or lowering panel loads at a production or handling station. The listed 3-ton capacity is only one selection condition; platform size, travel, load distribution and top transfer method must also match the project.适合在生产或搬运工位升降板件载荷。目录中的 3 吨承载只是选型条件之一,平台尺寸、升降行程、载荷分布和顶部移载方式也必须与项目匹配。
01
Best fit when适合这些情况
Panel stacks that must align with different transfer or working heights.需要与不同输送或操作高度对接的板垛。
Workstations that need controlled vertical movement within a defined footprint.需要在明确占地范围内受控升降的工位。
Projects where the load, centre of gravity and transfer surface can be specified.能够明确载荷、重心和移载表面的项目。
02
Process role工序如何衔接
01Place or receive the load on the agreed platform and locating datum.按约定平台与定位基准放置或接收载荷。
02Raise or lower the platform through the required working range.在所需工作范围内升高或降低平台。
03Transfer or handle the load at the agreed height before the next cycle.在约定高度完成载荷移交或操作,再进入下一循环。
03
Send for configuration选型报价请提供
Maximum load, normal load, centre of gravity and load distribution.最大载荷、常用载荷、重心及载荷分布。
Required platform length and width, lowest height and highest height.所需平台长/宽、最低高度和最高高度。
Top surface: plain platform, rollers, belt or another transfer arrangement.顶部形式:平面、滚筒、皮带或其他移载结构。
Pit, forklift access, duty cycle, guarding and adjacent equipment interfaces.地坑、叉车位、工作频率、安全防护及相邻设备接口。
Scope boundary供货边界
A 3-ton rating does not mean every off-centre load or platform arrangement is acceptable. Safe selection requires the load distribution, travel, installation and operating cycle to be reviewed together.3 吨额定承载不代表所有偏载或平台配置都适用。安全选型需要同时核对载荷分布、行程、安装方式和工作循环。
Acceptance focus验收重点
Test the agreed representative load through the full travel and operating sequence. Check height accuracy, stability, transfer at each interface, controls, guarding and emergency recovery.使用约定的代表性载荷完成全行程与完整操作循环,检查高度、稳定性、各接口移载、控制、安全防护和紧急恢复。
Use these reference specifications as a starting point. Send your workpiece range, line layout and target output to confirm the configuration.以下参数可作为选型参考。请提供工件范围、产线布局和目标产能,以便确认配置。
Maximum load最大载荷
≤ 3000 kg≤ 3000 kg
Height travel升降行程
450–1650 mm450–1650 mm
Table size台面尺寸
2500 × 1250 mm2500 × 1250 mm
Equipment names and purchasing decisions采购名称与工序确认
How do industrial lift tables differ from a roller transfer station?液压升降台、滚筒升降机和动力输送辊台如何配合?
A hydraulic lifting table changes the supported load height. Adding rollers provides a horizontal transfer surface; adding powered rollers introduces driven movement and an interface with neighbouring equipment. A conveyor at a fixed height does not provide the same lifting function. For furniture panel stacks, specify load distribution, low and high working positions, travel, pallet support and fork access as separate requirements.液压升降台负责调整载荷高度,滚筒升降机在升降台面上增加水平移载条件;有动力滚筒台面还需要驱动和相邻设备的联动。固定高度的动力输送辊台不能代替升降功能。家具板垛项目应分别列出载荷分布、最低及最高作业位置、升降行程、托盘支撑和叉车进入条件。
How should a lifting table hand over a complete panel stack?升降平台与地滚线交接整垛板材,怎样核对承载和高度?
A lifting table changes the working height, while the selected top determines how the load is transferred. For complete stack handling, provide the total weight including its load carrier, centre of gravity and supporting underside. Agree the transfer level, available travel, stops and receiving conveyor with FORTRAN. Test loading, lifting, alignment and unloading as one sequence. Lift-tables with roller tops and fixed-top tables perform different transfer tasks; neither the nominal load nor the platform size alone establishes a suitable handover.升降平台调整作业高度,台面形式决定如何移载。整垛板材交接时,需要提供含托盘或工装的总重量、重心与承载底面,并与富全确认交接高度、可用行程、止挡及接料输送段。把装载、升降、对齐和卸载作为完整过程试验。滚筒台面与固定台面的移载任务不同,额定载荷或台面尺寸都不能单独证明交接适用。
Related purchasing terms: hydraulic panel stack lifting platform; fixed-station panel lift; board stack height adjustment table. Confirm the operating method and supplied equipment against the configuration on this page.相关采购叫法:液压板垛升降平台、固定工位板材升降台、板垛高度调节台。请结合本页配置确认操作方式与供货设备范围。
Buyer questions采购常见问题
Questions to settle before choosing this equipment.选型前需要确认的问题
What is this equipment used for?3 吨板材液压升降台有什么用途?
It provides hydraulic height adjustment for panel loads up to 3 tonnes at handling and production workstations.在搬运和生产工位为不超过3吨的板材载荷提供液压高度调节。
What affects the price of this equipment?3 吨板材液压升降台的价格受哪些因素影响?
The price and machine scope depend on load and center of gravity, platform size, travel height, top transfer surface, forklift access, pit and duty cycle. A useful quotation should state the operating range, included equipment and project responsibilities instead of giving one price for different configurations.3 吨板材液压升降台的价格和设备范围取决于载荷及重心、平台尺寸、升降行程、顶部移载形式、叉车位、地坑和工作频率。有效报价应说明运行范围、包含设备和项目责任,不能用一个价格代表不同配置。
What information should I send for a quotation?询问3 吨板材液压升降台报价时需要提供什么?
Send load and center of gravity, platform size, travel height, top transfer surface, forklift access, pit and duty cycle, plus photos or drawings of the available area and any equipment that must connect to the new machine. These details help the supplier propose a configuration that fits your project.请提供载荷及重心、平台尺寸、升降行程、顶部移载形式、叉车位、地坑和工作频率,并附可用场地照片或图纸,以及需要连接的现有设备资料,便于制造商或供应商按照实际项目提出方案。
How should I compare equipment suppliers?如何比较3 吨板材液压升降台制造商和供应商?
Ask each company to respond to the same requirement brief. Compare the proposed configuration, stated limits, layout, controls and interfaces, acceptance method, documentation, delivery scope, installation responsibilities and after-sales support.建议让每家公司按照同一份需求资料回复,并比较建议配置、明确限制、布局、控制与接口、验收方法、技术文件、交付范围、安装责任和售后支持。
Is this the right solution for your production line?这项方案是否适合您的产线?
Send your workpiece sizes, target output, current machine model and destination country so we can review line compatibility and configuration options.请提供工件尺寸、目标产能、现有设备型号和目的国家,以便评估产线适配性与可选配置。