Images and specifications show a representative configuration. Final equipment details and delivery schedule are confirmed after your requirements are reviewed.图片与参数展示代表性配置;最终设备细节与交付安排将在需求评审后确认。
Lift and powered handover升降与动力交接
Coordinate forklift loading, vertical travel and powered roller transfer.统一确认叉车上料、垂直升降与动力滚筒移载
Best for stations where a supported panel load may arrive by forklift and then transfer across powered rollers at an agreed height. The platform, fork openings, roller layout and neighbouring conveyor must be designed as one handover system.适合板件载荷由叉车送达后,在约定高度通过动力滚筒完成交接的工位。平台、叉车位、滚筒布置和相邻输送设备需要作为一个交接系统统一设计。
01
Best fit when适合这些情况
Panel stacks or carriers that need both forklift access and driven conveyor handover.同时需要叉车位与动力输送交接的板垛或载具。
Layouts with a known receiving conveyor height, direction and control interface.接料输送高度、方向和控制接口明确的布局。
Loads whose underside remains supported across the selected roller and fork spacing.底面能够在所选滚筒与叉位间距上保持稳定支撑的载荷。
02
Process role工序如何衔接
01Place the agreed carrier or load on the platform through the defined fork openings.通过明确的叉车位,将约定载具或载荷放置在平台上。
02Raise or lower the table to the receiving conveyor height.将升降台调节至接料输送设备高度。
03Run the powered rollers and complete the controlled load handover.运行动力滚筒,完成受控载荷交接。
03
Send for configuration选型报价请提供
Load and carrier dimensions, total weight, centre of gravity and underside support.载荷与载具尺寸、总重量、重心和底部支撑。
Forklift model, fork dimensions, approach direction and required clearances.叉车型号、货叉尺寸、进入方向和所需净空。
Lowest and highest working positions, roller direction, speed and stopping point.最低与最高工作位置、滚筒方向、速度和停止点。
Adjacent conveyor drawing, control handshake, guarding and duty cycle.相邻输送设备图、控制联锁、安全防护和工作频率。
Scope boundary供货边界
Forklift access does not establish compatibility with every fork, pallet or carrier. Powered rollers also require an agreed load base and control interface. Confirm the selected model rating and working range on the final configuration drawing.叉车位不代表兼容所有货叉、托盘或载具。动力滚筒也需要明确的载荷底面与控制接口;所选型号承载和工作范围应在最终配置图上确认。
Acceptance focus验收重点
Test the representative load from forklift placement through full travel and powered handover. Check clearances, support, alignment, transfer, stopping, controls, guarding and fault recovery.使用代表性载荷,从叉车放置开始完成全程升降与动力交接,检查净空、支撑、对中、移载、停止、控制、安全防护和故障恢复。
Use these reference specifications as a starting point. Send your workpiece range, line layout and target output to confirm the configuration.以下参数可作为选型参考。请提供工件范围、产线布局和目标产能,以便确认配置。
Table size台面尺寸
2500 × 1250 mm2500 × 1250 mm
Equipment names and purchasing decisions采购名称与工序确认
How do industrial lift tables differ from a roller transfer station?液压升降台、滚筒升降机和动力输送辊台如何配合?
A hydraulic lifting table changes the supported load height. Adding rollers provides a horizontal transfer surface; adding powered rollers introduces driven movement and an interface with neighbouring equipment. A conveyor at a fixed height does not provide the same lifting function. For furniture panel stacks, specify load distribution, low and high working positions, travel, pallet support and fork access as separate requirements.液压升降台负责调整载荷高度,滚筒升降机在升降台面上增加水平移载条件;有动力滚筒台面还需要驱动和相邻设备的联动。固定高度的动力输送辊台不能代替升降功能。家具板垛项目应分别列出载荷分布、最低及最高作业位置、升降行程、托盘支撑和叉车进入条件。
How should a lifting table hand over a complete panel stack?升降平台与地滚线交接整垛板材,怎样核对承载和高度?
A lifting table changes the working height, while the selected top determines how the load is transferred. For complete stack handling, provide the total weight including its load carrier, centre of gravity and supporting underside. Agree the transfer level, available travel, stops and receiving conveyor with FORTRAN. Test loading, lifting, alignment and unloading as one sequence. Lift-tables with roller tops and fixed-top tables perform different transfer tasks; neither the nominal load nor the platform size alone establishes a suitable handover.升降平台调整作业高度,台面形式决定如何移载。整垛板材交接时,需要提供含托盘或工装的总重量、重心与承载底面,并与富全确认交接高度、可用行程、止挡及接料输送段。把装载、升降、对齐和卸载作为完整过程试验。滚筒台面与固定台面的移载任务不同,额定载荷或台面尺寸都不能单独证明交接适用。
Related purchasing terms: forklift-access powered roller lift; powered roller panel lifting platform; conveyor lift with forklift loading space. Confirm the operating method and supplied equipment against the configuration on this page.相关采购叫法:叉车装卸动力辊台升降机、动力辊筒板材升降平台、叉车上料输送升降台。请结合本页配置确认操作方式与供货设备范围。
Buyer questions采购常见问题
Questions to settle before choosing this equipment.选型前需要确认的问题
What is this equipment used for?带叉车位动力滚筒升降台有什么用途?
It combines powered roller transfer, controlled lifting and forklift access for flexible loading at one station.在同一工位结合动力滚筒输送、受控升降和叉车位,实现灵活上料。
What affects the price of this equipment?带叉车位动力滚筒升降台的价格受哪些因素影响?
The price and machine scope depend on load and center of gravity, platform size, travel height, top transfer surface, forklift access, pit and duty cycle. A useful quotation should state the operating range, included equipment and project responsibilities instead of giving one price for different configurations.带叉车位动力滚筒升降台的价格和设备范围取决于载荷及重心、平台尺寸、升降行程、顶部移载形式、叉车位、地坑和工作频率。有效报价应说明运行范围、包含设备和项目责任,不能用一个价格代表不同配置。
What information should I send for a quotation?询问带叉车位动力滚筒升降台报价时需要提供什么?
Send load and center of gravity, platform size, travel height, top transfer surface, forklift access, pit and duty cycle, plus photos or drawings of the available area and any equipment that must connect to the new machine. These details help the supplier propose a configuration that fits your project.请提供载荷及重心、平台尺寸、升降行程、顶部移载形式、叉车位、地坑和工作频率,并附可用场地照片或图纸,以及需要连接的现有设备资料,便于制造商或供应商按照实际项目提出方案。
How should I compare equipment suppliers?如何比较带叉车位动力滚筒升降台制造商和供应商?
Ask each company to respond to the same requirement brief. Compare the proposed configuration, stated limits, layout, controls and interfaces, acceptance method, documentation, delivery scope, installation responsibilities and after-sales support.建议让每家公司按照同一份需求资料回复,并比较建议配置、明确限制、布局、控制与接口、验收方法、技术文件、交付范围、安装责任和售后支持。
Is this the right solution for your production line?这项方案是否适合您的产线?
Send your workpiece sizes, target output, current machine model and destination country so we can review line compatibility and configuration options.请提供工件尺寸、目标产能、现有设备型号和目的国家,以便评估产线适配性与可选配置。