Uses servo-controlled motion and vacuum gripping to load or unload panels between stacks, conveyors and processing equipment.采用伺服控制和真空吸附,在板材垛、输送线与加工设备之间完成自动上下料。
Images and specifications show a representative configuration. Final equipment details and delivery schedule are confirmed after your requirements are reviewed.图片与参数展示代表性配置;最终设备细节与交付安排将在需求评审后确认。
Automatic panel handling板材自动搬运
Design pickup, travel and placement around the real stack positions.围绕真实板垛位置设计取板、移动与放板流程
The FORTRAN automatic panel gantry loader and unloader uses servo-controlled movement and vacuum pickup to transfer panels between defined stacks, conveyors and processing stations. It is panel handling equipment for furniture and wooden-door production, not the cutting, drilling or edge-banding machine itself. Choose the loading and unloading system around the panel surface, receiving-machine interface and stack-change route rather than the gantry shape alone.FORTRAN 自动板材龙门上下料设备通过伺服运动和真空吸取,在指定板垛、输送段及加工工位之间转运板件。它属于家具与木门生产的板材搬运设备,不是开料、钻孔或封边主机。应根据板件表面、接料主机接口及换垛路径选择上下料方案,而不是只按龙门外形选型。
01
Best fit when适合这些情况
Repeated panel pickup and placement between known positions.在明确位置之间重复完成板件取放。
Factories reducing manual handling around processing cells.希望减少加工单元周边人工搬运的工厂。
Projects where stack replenishment and host handover can be planned together.可以统一规划补垛与主机交接的项目。
02
Process role工序如何衔接
01Define the pickup stack, replenishment route and receiving station.确定取料板垛、补垛路径和接料工位。
02Evaluate vacuum pickup, travel and placement with the actual panel surface.结合实际板件表面核对真空吸取、移动与放板。
03Coordinate the receiving conveyor or host machine before the next cycle.与接料输送或主机确认交接条件,再组织下一循环。
03
Send for configuration选型报价请提供
Panel length, width, thickness, weight, finish, porosity and film.板件长/宽/厚、重量、饰面、透气性及保护膜。
Stack height, pickup and placement coordinates and stack-change method.垛高、取放坐标及换垛方式。
Host-machine model, conveyor height, locating datum and signals.主机型号、输送高度、定位基准及接口信号。
Dimensioned layout, clear travel space and operator or forklift routes.带尺寸的布局、运动净空及人员或叉车通道。
Scope boundary供货边界
Gantry structure does not specify station count. Single-panel pickup and whole-stack transfer are different duties, and existing-machine suitability requires interface and sample review.龙门结构不代表工位数量。逐张取板与整垛搬运属于不同任务,适配现有主机还需要核对接口并进行样板评估。
Acceptance focus验收重点
Check pickup, placement, surface contact, stack changes and stop recovery with representative panels. Measure the complete operating cycle rather than travel speed alone.使用代表性板件检查吸取、落板、表面接触、换垛和停机恢复,并按完整循环衡量产出,而不是只看移动速度。
The listed dimensions refer to the catalogue FQ-LMJT2 configuration, not every gantry layout. Payload, suction arrangement and cycle time must be confirmed for the actual panel and travel path. Do not substitute specifications from GL-04, GL-T2 or other station arrangements without a model review.所列尺寸对应目录中的 FQ-LMJT2 配置,不代表所有龙门布局。承载、吸盘布置及循环时间需按实际板件和运动路径确认,不能未经型号核对就套用 GL-04、GL-T2 或其他工位方案的参数。
Model型号
FQ-LMJT2FQ-LMJT2
Overall dimensions外形尺寸
L 4800 × W 4800 × H 4700 mm长 4800 × 宽 4800 × 高 4700 mm
Panel length板材长度
300–2400 mm300–2400 mm
Panel width板材宽度
300–1200 mm300–1200 mm
Total power总功率
9 kW9 kW
Equipment names and purchasing decisions采购名称与工序确认
What should a gantry loader quotation say about stacking and unstacking?龙门上料机报价中,单张取板、拆垛和堆垛要怎样说明?
A gantry loader is a panel handling solution with defined pickup and placement positions. Feeding systems may separate boards from a stack, while feeders and stackers can also build a receiving stack. For FORTRAN vacuum-gripping configurations, provide panel surface and weight information and identify each stack position. Confirm whether the cycle picks one panel, performs destacking or restacking, or handles a different load arrangement. The number of gantries, working stations and support pillars describes different aspects of the layout. State replenishment and manual tasks separately.龙门上料机属于板材搬运设备,自动上料方案需要写清取板和放板位置。“拆垛、堆垛、重新码垛”描述工序,不代表固定工位数量。选择富全真空抓取配置时,应提供板件表面和重量资料,逐个标出取料垛及接料垛,说明每次取单张板、逐张堆垛还是采用其他承载方式。龙门数量、工作工位与支撑立柱数量分别确认,并单列补垛、换垛和保留的人工工作。
How should vacuum pickup and surface contact be tested for automated panel feeding?龙门自动取板的吸具与饰面接触,怎样确认适配?
For automated panel feeding, list board dimensions, weight, porosity, finish and stack alignment. Vacuum pick-up devices, round suction cups and surface grippers describe possible pickup arrangements, not interchangeable specifications. FORTRAN evaluates the selected pickup configuration with representative samples. Test board separation, holding during travel, placement and release, including thin or easily marked panels. Record the contact pattern and acceptable surface result; surface-protecting feeding is a sample acceptance requirement, not a promise of zero marks on every board.自动取板应列明板件尺寸、重量、透气性、饰面与板垛对齐方式。真空取料装置、圆形吸盘和面式吸具是不同取料方式,不能仅凭名称相互替代。富全按所选配置与代表性样板评估,测试分张、移动中的保持、放板和释放,包含薄板及易留痕板件。接触位置与允许的表面结果应写入验收要求,不能把保护表面的目标写成对所有板材零划伤的保证。
Related purchasing terms: vacuum gantry panel loader; panel gantry loading and unloading system; automatic panel loading and unloading system. Confirm the operating method and supplied equipment against the configuration on this page.相关采购叫法:真空龙门板材上料机、板材龙门上下料系统、板件自动取放设备。请结合本页配置确认操作方式与供货设备范围。
Buyer questions采购常见问题
Questions to settle before choosing this equipment.选型前需要确认的问题
Can a vacuum panel gantry loader handle every board surface?真空龙门上料机适合所有板材表面吗?
Suitability depends on the actual surface, porosity, protective film, openings and panel weight. Test representative samples with the proposed suction arrangement and travel path. A panel’s length and width being within range does not by itself confirm reliable pickup. Single-panel handling and whole-stack transfer are separate duties.适配性取决于实际表面、透气性、保护膜、孔洞和板件重量。需用拟定吸盘布置和运动路径测试代表性样板,长宽在范围内不等于可靠吸取;逐张搬运与整垛转运也属于不同任务。
Can the loading and unloading system connect to our existing machine?自动上下料系统能接入现有设备吗?
Review the host model, infeed and outfeed height, locating edge, loading clearance and ready/stop signals. Mark stack positions, forklift access and the complete panel route on a dimensioned layout. Compatibility must be agreed for that installation; the gantry is handling equipment and does not include the processing machine by default.需核对主机型号、进出料高度、定位边、装料净空与就绪/停止信号。在带尺寸的布局上标出板垛、叉车通道及完整板件路径。兼容性需按具体安装方案约定;龙门属于搬运设备,默认不包含加工主机。
How is gantry loading output assessed for furniture production?家具生产中的龙门上下料产能怎样评估?
Measure the complete sequence: pickup, travel, placement, return and receiving-machine permission. Include stack changes and interruptions in the agreed trial. Station count and unloaded travel speed are not a guaranteed panels-per-minute rate. Provide the order mix and host-machine cycle before requesting an output commitment.应测量取板、移动、放板、返回及主机放行的完整流程,并在约定试验中纳入换垛与中断。工位数量和空载移动速度不等于保证的每分钟板件数。要求产能承诺前,应提供订单组合和主机节拍。
Is this the right solution for your production line?这项方案是否适合您的产线?
Send your workpiece sizes, target output, current machine model and destination country so we can review line compatibility and configuration options.请提供工件尺寸、目标产能、现有设备型号和目的国家,以便评估产线适配性与可选配置。