T-Type Two-Station Panel Gantry Loading and Unloading MachineT 型双工位板材龙门式上下料机
FORTRAN T-type gantry loader and unloader serves two defined panel-handling positions. Station duties, movement sequence and replenishment stops are confirmed for the project.FORTRAN 富全 T 型龙门上下料机服务两个明确的板材搬运位置,工位用途、动作顺序和补垛停机条件按项目确认。
Images and specifications show a representative configuration. Final equipment details and delivery schedule are confirmed after your requirements are reviewed.图片与参数展示代表性配置;最终设备细节与交付安排将在需求评审后确认。
Furniture factory procurement家具工厂采购与改造
Specify the two working positions and their operating sequence.把双工位的用途、取放顺序和换垛条件写进方案
FORTRAN supplies a T-type two-station panel gantry loader and unloader for furniture production. The T-shaped layout serves two defined work positions. Two stations describe the positions in the layout, not two support pillars or a guarantee that both cycles run independently at the same time.FORTRAN 富全提供 T 型双工位板材龙门上下料机,用于家具生产中的板件取放。T 型描述布局,双工位描述两个工作位置,不是两根立柱,也不代表两个工位必然同时独立运行。
01
Best fit when适合这些情况
Panel-handling projects with two defined pickup or receiving positions.已明确两个取料或接料位置的板材搬运项目。
Factories checking gantry loading and unloading against an existing conveyor or processing cell.需要核对龙门上下料与现有输送段或加工单元衔接的工厂。
Layouts where stack replenishment and operator access must be planned alongside the transfer.需要同时规划取放、补垛和人员通道的车间布局。
02
Process role工序如何衔接
01Mark the two working positions, panel arrival route and outgoing conveyor or stack.标出两个工作位置、板材来料路线以及出料输送段或板垛。
02Define the pickup and placement sequence and how a stack is replaced.明确取放顺序和换垛过程,确认补料时哪些动作需要暂停。
03Coordinate placement with the receiving equipment before starting the next transfer.将放板动作与接料设备的状态衔接后,再组织下一次移送。
03
Send for configuration选型报价请提供
Minimum, maximum and common panel sizes, weight, finish and flatness.最小、最大及常用板件尺寸、重量、饰面与平整度。
The role and coordinates of each station, stack height and replenishment access.每个工位的用途和坐标、垛高及补料通道。
Required single-panel or stack-handling duty and the proposed gripping method.逐张取板或整垛搬运要求,以及拟采用的抓取方式。
Host-model documents, permission signals, placement datum and recovery sequence.主机型号资料、放行信号、落板基准及恢复顺序。
Scope boundary供货边界
Two stations describe work positions, not two support pillars or a promise of simultaneous independent cycles. Confirm the gripping arrangement and single-panel or stack-handling duty for the proposed configuration; do not infer them from the T-shaped frame.双工位描述作业位置,不是两根立柱,也不是两个工位可同时独立运行的承诺。拟选配置的抓取方式、逐张取板或整垛搬运任务需要单独确认,不能从 T 型支架外形推断。
Acceptance focus验收重点
Use representative panels at both working positions. Check placement accuracy against the agreed datum, surface contact, stack change, occupied-station handling and restart. Record cycle time with replenishment included.在两个工作位置分别使用代表性板件试机,按约定基准检查落板、表面接触、换垛、工位占用处理和停机恢复;将补料时间纳入循环评估。
Use these reference specifications as a starting point. Send your workpiece range, line layout and target output to confirm the configuration.以下参数可作为选型参考。请提供工件范围、产线布局和目标产能,以便确认配置。
Workpiece length工件长度
300–2750 mm300–2750 mm
Workpiece width工件宽度
300–1220 mm300–1220 mm
Workpiece thickness工件厚度
18–80 mm18–80 mm
Equipment names and purchasing decisions采购名称与工序确认
Does a two-station gantry provide the same buffer arrangement as three or four stations?双工位龙门与三工位、四工位上下料可以直接互换吗?
No. Assign pickup, receiving and stack-change duties to actual positions on the layout. Additional positions can be allocated differently, but their functions and sequence must be specified. Count work positions separately from support pillars and confirm whether replenishment interrupts the planned cycle.不能直接互换。应在布局图上把取料、接料和换垛任务分配到实际位置,新增工位的用途及动作顺序需要明确约定。工位数量与立柱数量分开统计,并核对补料是否会中断计划运行循环。
Related purchasing terms: T-type two-station gantry loader; two-position panel loading and unloading; T-shaped gantry panel handling. Confirm the operating method and supplied equipment against the configuration on this page.相关采购叫法:T型双工位龙门上料机、双位置板材上下料、T型龙门板件搬运。请结合本页配置确认操作方式与供货设备范围。
Buyer questions采购常见问题
Questions to settle before choosing this equipment.选型前需要确认的问题
What does two-station mean on a T-type panel gantry loader?T 型龙门上下料的“双工位”具体指什么?
It means two work positions in the proposed layout. Assign pickup, receiving or stack-change duties to each position and document their operating sequence. The count does not describe support pillars and does not prove simultaneous independent cycles. Confirm which movements stop during replenishment.指方案中的两个工作位置。应分别指定取料、接料或换垛用途并写明运行顺序。工位数量不是立柱数量,也不能证明两工位同时独立运行;需要确认补垛时哪些动作必须停止。
Can a T-type gantry specification be used for both single panels and whole stacks?T 型龙门的同一份方案能默认兼顾单张板和整垛吗?
No. State the handling duty explicitly. Single-panel pickup, destacking, restacking and whole-stack transfer are different requirements. Supply panel or load dimensions, weight, surface and stack arrangement, then confirm the gripping and supporting configuration. The T-shaped layout alone does not establish any of these capacities.不能。逐张取板、拆垛、堆垛和整垛移送是不同要求。需提供板件或载荷尺寸、重量、表面及堆垛方式,再确认抓取与支撑配置。T 型布局本身不能证明具备其中任一载荷能力。
What should a two-station gantry acceptance trial include?双工位龙门上下料怎样做样板验收?
Test representative panels at both specified positions, including stack change, the receiving-machine handover and restart after an interruption. Agree the placement reference and surface-contact checks. Measure the complete handling cycle with replenishment included rather than using unloaded gantry travel as line output.在两个约定位置使用代表性板件测试,纳入换垛、接料主机交接和中断后恢复;约定落板基准与表面接触检查。按包含补料的完整搬运循环记录结果,不能把龙门空载移动速度当作整线产出。
Is this the right solution for your production line?这项方案是否适合您的产线?
Send your workpiece sizes, target output, current machine model and destination country so we can review line compatibility and configuration options.请提供工件尺寸、目标产能、现有设备型号和目的国家,以便评估产线适配性与可选配置。