Double-Row Panel Return System for Twin Edge Banders
Edge-bander return systems封边机自动回料系统

Double-Row Panel Return System for Twin Edge Banders同向双封边机双排回料系统

FORTRAN double-row return system connects two same-direction edge banders through defined panel return paths. Routing, host-machine interfaces and output are confirmed for the proposed layout.FORTRAN 富全双排回板系统通过明确的板件回料路径连接两台同向封边机,流转顺序、主机接口及产出按具体布局确认。

Read product details in Chinese →查看中文设备资料与选型 →
Ask on WhatsAppWhatsApp 咨询

Your contact and a short message are enough to start.留下联系方式和一句需求,即可开始沟通。

Brand品牌FORTRANFORTRAN
Manufacturing location生产基地Foshan, Guangdong, China中国广东佛山
Configuration配置方式Project-specific configuration按项目需求配置
Images and specifications show a representative configuration. Final equipment details and delivery schedule are confirmed after your requirements are reviewed.图片与参数展示代表性配置;最终设备细节与交付安排将在需求评审后确认。

Define both return paths before connecting two edge banders.两台同向封边机连线,先把两条回板路径画清楚

FORTRAN supplies a double-row panel return system for two same-direction edge-banding machines. It provides return and transfer paths around the two host machines. The return line handles panels; the edge banders carry out edge processing and their supply and interfaces must be specified separately.FORTRAN 富全提供两台同向封边机双排回板线,也称双排回转连线。方案围绕两台主机组织板件回料与交接;回板系统负责搬运,封边主机负责加工,两者供货范围及接口需要分别约定。

01

Best fit when适合这些情况

  • Furniture factories evaluating a connection around two existing same-direction edge banders.评估两台现有同向封边机配套连线的板式家具厂。
  • Projects comparing a single return lane with two distinct return paths.需要比较单排回料与双排回料路径的项目。
  • Cells with a defined machining-pass sequence and a dimensioned return area.已有明确板边加工顺序和回料区域尺寸的生产单元。
02

Process role工序如何衔接

  1. 01Draw the infeed and outfeed of both edge banders and mark the locating edge at each pass.画出两台封边机的进出料位置,标明每次加工的定位边。
  2. 02Define which return lane receives each panel and the transfer needed before the next machining pass.确定板件进入哪一排回料通道,以及进入下一道加工前所需的移载动作。
  3. 03Agree occupied, ready and release signals between return conveyors and host machines.约定回板输送与主机之间的占用、就绪和放行信号。
03

Send for configuration选型报价请提供

  • Both machine makes and models, feed arrows, infeed/outfeed heights and locating edges.两台主机品牌型号、进料箭头、进出料高度及定位边。
  • A marked sequence showing which panel edge is processed on each pass.标明每一道加工哪条板边的流转顺序图。
  • Panel size, weight, finish and representative mixed-order sequence.板件尺寸、重量、饰面及代表性混合订单顺序。
  • Available return space, operator crossings, control signals and recovery responsibilities.回料区域、人员通道、控制信号及异常恢复责任。
Scope boundary供货边界

Two lanes do not by themselves double output or establish that two panels can be processed simultaneously. The complete cycle depends on both edge banders, transfers and the workpiece mix. The return system is handling equipment; host machines and any turning modules need an agreed supply scope.双排不代表产出直接翻倍,也不能据此认定两块板能同时加工。持续产出取决于两台主机、移载动作和板件组合。回转系统属于搬运连接设备,封边主机及转向模块的供货范围需要分别确认。

Acceptance focus验收重点

Run the agreed mixed panel sequence through both return paths. Check locating edges, transfer contact, queue recovery and restart when one host stops; measure the complete processing loop rather than conveyor speed alone.按约定的混合板件顺序测试两条回料路径,检查定位边、移载接触、排队恢复及单台主机停机后的重启。按完整加工循环核对产出,不能只比较输送速度。

Core specifications.核心参数

Use these reference specifications as a starting point. Send your workpiece range, line layout and target output to confirm the configuration.以下参数可作为选型参考。请提供工件范围、产线布局和目标产能,以便确认配置。

Working height工作高度
900±50 mm900±50 mm
Plate aspect ratio板材长宽比
1:7.51:7.5
Workpiece length工件长度
250–2750 mm250–2750 mm
Maximum load最大载荷
60 kg60 kg
Workpiece width工件宽度
250–1220 mm250–1220 mm
Conveying speed输送速度
18–32 m/min18–32 m/min

Equipment names and purchasing decisions采购名称与工序确认

Should two same-direction edge banders use a single-row or double-row return?两台同向封边机应该选单排还是双排回板线?

Draw both machine feed directions and each required edge-processing pass. Compare the return routes, queue positions and handover points before choosing a lane count. A second return lane changes material routing; output still depends on machining cycles, transfers and the panel mix. Request a layout and an agreed mixed-panel trial for both options.先画出两台主机进料方向及各板边的加工顺序,再比较回料路径、排队位置和交接点。增加一排改变的是物料路径,产出仍受主机循环、移载和板件组合影响。比较报价时,应要求两种方案提供对应布局和约定的混合板件试机条件。

Compare equipment and quotation requirements比较相关设备与询价条件 →

Names used for this equipment这款设备的采购叫法

Related purchasing terms: double-row return for two same-direction edge banders; twin edge bander double-row return conveyor; double-row panel circulation system. Confirm the operating method and supplied equipment against the configuration on this page.相关采购叫法:两台同向封边机双排回板线、双封边机双排回送输送线、双排板件循环系统。请结合本页配置确认操作方式与供货设备范围。

Questions to settle before choosing this equipment.选型前需要确认的问题

Does double-row return mean two edge banders can process every panel simultaneously?双排回板是否等于两台封边机能同时加工所有板件?

No. Double-row describes return paths. The machining sequence still depends on which edge must be processed, panel orientation, the host cycles and transfer permission. Draw one complete panel route through the proposed cell and then check a mixed-panel sequence. Do not infer doubled output from a second lane.不是。双排描述回料路径,实际加工顺序仍取决于待加工板边、板件朝向、主机循环和移载放行条件。先画出一块板在生产单元中的完整路径,再检查混合板件顺序,不能把增加一排理解为产能翻倍。

What must be checked before retrofitting two existing edge banders?现有两台封边机加装双排回板线,要先核对什么?

Provide both machine models and dimensioned infeed/outfeed drawings. Mark locating edges, height, feed direction, operator crossings and maintenance clearance. Agree mechanical handovers, permission and stop signals, panel tracking if required, and which party modifies each interface. Similar machine dimensions alone do not establish compatibility.提供两台主机型号和带尺寸的进出料图,标明定位边、高度、进料方向、人员通道与检修空间。明确机械交接、放行和停止信号、需要时的板件跟踪,以及每项接口由谁修改。主机尺寸接近并不等于可以直接兼容。

How should a twin-edgebander return line handle a downstream stop?双机封边回板线怎样约定后道停机后的处理?

Define where arriving panels wait, how upstream feeding stops and how operators clear or restart the cell. During acceptance, test the agreed mixed-panel sequence and stop/restart conditions on both return paths. Verify locating edges and surface contact after each handover. These are requirements to agree, not a claim that every configuration includes automatic fault recovery.先约定来料等待位置、上游停止进料方式,以及人员清料和重启步骤。验收时用约定的混合板件顺序测试两条路径与停机恢复,检查每次交接后的定位边和表面接触。这些是需要约定的要求,不代表所有配置都包含自动故障恢复。

Project enquiry项目咨询

Is this the right solution for your production line?这项方案是否适合您的产线?

Send your workpiece sizes, target output, current machine model and destination country so we can review line compatibility and configuration options.请提供工件尺寸、目标产能、现有设备型号和目的国家,以便评估产线适配性与可选配置。

Ask on WhatsAppWhatsApp 咨询
No app or email client required

Get a quick quote

Leave a contact method and one sentence about what you need so we can discuss your project.

Current pageGeneral website enquiry
Choose more than one if needed. Quick text is added without replacing your own message.