Images and specifications show a representative configuration. Final equipment details and delivery schedule are confirmed after your requirements are reviewed.图片与参数展示代表性配置;最终设备细节与交付安排将在需求评审后确认。
Cabinet squaring and pressing柜体校方与压装
Match the case clamp to the cabinet construction and assembly method.让柜体压装机匹配真实柜体结构与组装工艺
Also called a cabinet press, cabinet carcass press or case clamp, this equipment positions and presses cabinet components during assembly. FORTRAN has manual-feed and automatic-feed configurations, so the feed method and line boundary should be confirmed with the selected model.该设备也常称柜体压装机、柜体组装压机或 case clamp,用于在组装过程中定位并压紧柜体部件。FORTRAN 有人工进料和自动进料配置,因此进料方式与连线边界应按所选型号确认。
01
Best fit when适合这些情况
Cabinet carcasses that need controlled squaring and pressing during assembly.组装时需要受控校方与压紧的柜体。
Factories that need repeatable setup across a defined cabinet size range.需要在明确柜体尺寸范围内重复设定的工厂。
Standalone cells or integrated lines with a defined feed and discharge method.进出料方式明确的独立工位或自动连线。
02
Process role工序如何衔接
01Pre-assemble the cabinet using the agreed joint and adhesive process.按照约定连接与施胶工艺预组装柜体。
02Position the carcass and apply the selected vertical and horizontal pressing sequence.定位柜体,并执行所选上下及侧向压装顺序。
03Hold for the agreed time, release and transfer the cabinet for inspection or the next process.按约定时间保压后释放,并将柜体送往检查或下一工序。
03
Send for configuration选型报价请提供
Minimum, maximum and common cabinet length, width, height and weight.柜体最小、最大及常用长/宽/高与重量。
Panel construction, joint method, adhesive and required hold time.板件结构、连接方式、胶黏剂和所需保压时间。
Required pressure, squareness tolerance and protected visible surfaces.所需压力、方正度要求和需要保护的可见表面。
Manual or automatic feed, target cycle, operator tasks and line interfaces.人工或自动进料、目标节拍、人工任务和产线接口。
Scope boundary供货边界
A cabinet case clamp is for assembled cabinet carcasses; it is not a panel hot press. Published ranges differ between manual-feed and automatic-feed models, and conveyors, automatic positioning or upstream assembly are included only when specified.柜体压装机用于已预组装的柜体,不是板材热压机。人工进料与自动进料型号的适用范围不同;输送、自动定位或前道组装只有明确列入方案后才属于供货范围。
Acceptance focus验收重点
Press representative minimum, maximum and common cabinets. Check loading, surface protection, pressure sequence, diagonals or agreed squareness measure, hold time, release and discharge.使用最小、最大及常用柜体试压,检查上料、表面保护、压装顺序、对角线或约定方正度、保压时间、释放和出料。
Use these reference specifications as a starting point. Send your workpiece range, line layout and target output to confirm the configuration.以下参数可作为选型参考。请提供工件范围、产线布局和目标产能,以便确认配置。
Workpiece processing length工件加工长度范围
300–2800 mm300–2800 mm
Overall dimensions外形尺寸
4650 × 1600 × 2850 mm4650 × 1600 × 2850 mm
Workpiece processing width工件加工宽度范围
300–800 mm300–800 mm
Conveying speed输送速度
25–50 m/min25–50 m/min
Workpiece processing height工件加工高度范围
300–1320 mm300–1320 mm
Names used for this equipment这款设备的采购叫法
Related purchasing terms: cabinet case clamp; cabinet assembly press; furniture carcass assembly machine. Confirm the operating method and supplied equipment against the configuration on this page.相关采购叫法:柜体压装机、柜体组装压合机、家具柜体装配设备。请结合本页配置确认操作方式与供货设备范围。
Buyer questions采购常见问题
Questions to settle before choosing this equipment.选型前需要确认的问题
What is this equipment used for?柜体组装机有什么用途?
It aligns and presses cabinet components during assembly to improve squareness, consistency and operator efficiency.在柜体组装过程中对部件进行校正和压合,提高方正度、装配一致性和操作效率。
What affects the price of this equipment?柜体组装机的价格受哪些因素影响?
The price and machine scope depend on cabinet or drawer dimensions, panel construction, joining method, pressure and positioning needs, feed method, cycle and operator workflow. A useful quotation should state the operating range, included equipment and project responsibilities instead of giving one price for different configurations.柜体组装机的价格和设备范围取决于柜体或抽屉尺寸、板件结构、连接方式、压力及定位需求、进料方式、节拍和操作流程。有效报价应说明运行范围、包含设备和项目责任,不能用一个价格代表不同配置。
What information should I send for a quotation?询问柜体组装机报价时需要提供什么?
Send cabinet or drawer dimensions, panel construction, joining method, pressure and positioning needs, feed method, cycle and operator workflow, plus photos or drawings of the available area and any equipment that must connect to the new machine. These details help the supplier propose a configuration that fits your project.请提供柜体或抽屉尺寸、板件结构、连接方式、压力及定位需求、进料方式、节拍和操作流程,并附可用场地照片或图纸,以及需要连接的现有设备资料,便于制造商或供应商按照实际项目提出方案。
How should I compare equipment suppliers?如何比较柜体组装机制造商和供应商?
Ask each company to respond to the same requirement brief. Compare the proposed configuration, stated limits, layout, controls and interfaces, acceptance method, documentation, delivery scope, installation responsibilities and after-sales support.建议让每家公司按照同一份需求资料回复,并比较建议配置、明确限制、布局、控制与接口、验收方法、技术文件、交付范围、安装责任和售后支持。
Is this the right solution for your production line?这项方案是否适合您的产线?
Send your workpiece sizes, target output, current machine model and destination country so we can review line compatibility and configuration options.请提供工件尺寸、目标产能、现有设备型号和目的国家,以便评估产线适配性与可选配置。