A cabinet or drawer assembly quotation should be based on representative products, joining steps and an agreed squareness check. Compare the press, feeding, transfer and operator scope separately.柜体或抽屉组装设备报价应基于代表性产品、连接步骤和约定方正度检查方法,并分别比较压装、进料、转运及人工范围。
Define the quotation明确报价范围
What changes the scope, cost and acceptance conditions?哪些条件影响范围、成本及验收?
Send product drawings and assembly sequence提交产品图纸与组装顺序
Provide cabinet or drawer dimensions, panel thickness and construction, joints and fittings, component preparation, target cycle, daily mix and representative samples or drawings.提供柜体或抽屉尺寸、板厚与结构、连接方式与五金、部件准备、目标节拍、每日组合及代表性样品或图纸。
List pressing, feeding and transfer separately分别列出压装、进料与转运
Ask the quotation to identify the assembly press or clamp, positioning and adjustment, infeed and outfeed, conveyors, controls, guarding, operator tasks, installation and training.要求报价列明压装或夹紧设备、定位与调节、进出料、输送、控制、安全防护、人工任务、安装和培训。
Agree on representative assembly checks约定代表性组装检查
Use selected cabinets or drawers covering the required range and record dimensional, squareness, joint and handling checks. Measure the complete operating cycle with the stated manual tasks.使用覆盖要求范围的代表性柜体或抽屉,记录尺寸、方正度、连接和搬运检查,并结合明确人工任务测量完整操作节拍。
Equipment covered相关设备
Compare the equipment for your application.比较适合您应用的设备
Compare cabinet pressing and drawer assembly equipment for squaring, positioning and holding furniture components during assembly.比较用于家具部件组装时校方、定位和夹持的柜体压装及抽屉组装设备。
Cabinet Assembly Machine柜体组装机
FORTRAN supplies cabinet assembly presses, also called cabinet carcass presses or case clamps, for positioning, squaring and pressing pre-assembled cabinet components. Manual-feed and automatic-feed configurations have different ranges and interfaces.FORTRAN 富全柜体组装压机用于定位、校方和压紧预组装柜体,也可称柜体压装机或 case clamp。人工进料与自动进料配置的适用范围和接口不同。
Compare the same scope, responsibilities and acceptance basis.按照相同范围、责任和验收依据比较
01
Define one requirement brief统一需求资料
Use the same workpiece range, output target, layout and interfaces for every supplier.让每个供应商使用相同的工件范围、产能目标、布局和接口资料。
02
Check the scope of supply核对供货范围
Confirm included conveyors, controls, guarding, drawings, installation and commissioning responsibilities.确认报价包含的输送设备、控制、安全防护、图纸,以及安装调试责任。
03
Compare stated limits比较明确限制
Review the operating range and exclusions behind each price instead of comparing only the total.核对每个价格对应的运行范围和排除项,不只比较总价。
04
Agree on acceptance约定验收依据
Record the sample, cycle, functions and documents used to confirm that the equipment meets the agreed scope.记录用于确认设备符合约定范围的样品、节拍、功能和文件。
Buyer questions采购问题
Questions about price, manufacturers and quotations.价格、制造商与报价常见问题
What information is needed for a cabinet assembly machine quotation?柜体组装机报价需要哪些资料?
Send cabinet dimensions and construction, joints and fittings, component preparation, feed method, target cycle, product mix, layout, utilities and the required assembly inspection method.请提供柜体尺寸与结构、连接方式与五金、部件准备、进料方式、目标节拍、产品组合、布局、公用条件和组装检查方法。
Can one assembly machine handle both cabinets and drawers?一台组装设备可以同时处理柜体和抽屉吗?
Do not assume this from overlapping dimensions. Cabinet carcasses and drawer boxes can use different support, positioning and pressing sequences. Submit both product families for a configuration review.不能仅因尺寸重叠就这样假定。柜体框架和抽屉盒可能使用不同支撑、定位和压装顺序,应分别提交两类产品进行配置评估。