How to Choose Robotic Panel Handling Workstations机器人板材搬运工作站选型指南
Choose a robotic panel-handling workstation by the exact pick, place, sorting or palletizing task. Robot axes alone do not define payload, reach, gripping suitability, cycle or line integration.机器人板件搬运工作站应根据准确抓取、放置、分拣或码垛任务选型。仅凭机器人轴数不能确定负载、覆盖范围、抓取适用性、节拍或产线集成。
Compare configurations比较实际配置
Which equipment arrangement fits your production task?哪种设备配置适合您的生产任务?
Define every pickup and placement point明确每个取放位置
Map where the part arrives, how it is oriented, where it must be placed and what happens when a destination is unavailable. Separate sorting, machine loading and palletizing tasks in the sequence.梳理工件到达位置与朝向、目标放置位置,以及目标不可用时如何处理,并在流程中区分分拣、主机上下料和码垛任务。
Review the workpiece and gripping surface评估工件与抓取表面
Provide minimum, maximum and typical dimensions, weight, center of gravity, surface, porosity and stiffness. Send representative samples so the proposed gripper can be assessed under normal and difficult conditions.提供最小、最大及常用尺寸、重量、重心、表面、多孔性和刚性,并提供代表性样板,以便在正常及困难条件下评估抓具。
Check reach, cycle, safety and interfaces together同时核对覆盖、节拍、安全与接口
Supply a measured layout, machine heights and signals, required cycle, operator tasks and replenishment method. Confirm guarding, access and recovery around the complete cell rather than selecting the robot separately.提供实测布局、主机高度与信号、目标节拍、人工任务和补料方式,并围绕完整工作站确认安全防护、人员进入及异常恢复,不能只单独选择机器人。
Equipment covered相关设备
Compare the equipment for your application.比较适合您应用的设备
Plan robotic picking, sorting, transfer and palletizing cells for furniture components and packaged products.规划家具部件和包装件的机器人抓取、分拣、转运及码垛工作站。
Robotic Workstation for Automated Furniture Sorting and Packaging Line家具自动分拣包装线机器人工作站
Uses an industrial robot to sort, pick and transfer furniture components within an automated packaging flow.采用工业机器人在自动化包装流程中完成家具部件的分拣、抓取和转运。
Move from workpiece data to a confirmed layout.从工件数据到确认布局
01
Define the workpiece range确定工件范围
Provide minimum, maximum and typical products, including weight, surface and supporting underside.提供最小、最大及常用产品,包括重量、表面和承载底面。
02
Map the production sequence梳理生产顺序
Show where the equipment receives, processes, transfers and releases each workpiece.说明设备在何处接收、处理、转运和释放每件工件。
03
Confirm interfaces and cycle确认接口与节拍
Record machine models, heights, directions, signals, operator tasks and target production rate.记录主机型号、高度、方向、信号、操作任务和目标产能。
04
Review the proposed layout检查建议布局
Check access, safety area, maintenance space, utilities and exceptional workpiece handling before final confirmation.最终确认前检查通道、安全区域、维护空间、公用条件和特殊工件处理方式。
Buyer questions采购问题
Questions before choosing a machine or line.选择单机或整线前的常见问题
Is a four-axis column robot suitable for every panel-handling task?四轴立柱机器人适合所有板件搬运任务吗?
No. Suitability depends on the required movement, reach, workpiece, gripper, cycle, layout and interfaces. Compare the complete workstation against the actual task before confirming the robot structure.不是。适用性取决于所需动作、覆盖范围、工件、抓具、节拍、布局和接口。确认机器人结构前应按真实任务比较完整工作站。
How is a robotic workstation different from a gantry loader?机器人工作站与龙门上下料有什么区别?
They use different movement structures and may suit different paths, work envelopes and layouts. Define the same pickup, placement and cycle task, then compare the complete cell rather than assuming one technology is always better.两者采用不同运动结构,可能适合不同路径、工作范围和布局。应先定义相同取放与节拍任务,再比较完整单元,不能假定某一种技术始终更好。